Results 1 to 11 of 11

Thread: Entering server info

  1. #1
    Join Date
    Oct 2012
    Posts
    11
    Satfix Buxs
    141
    Thanks
    0
    Thanked 26x in 3 Posts

    Default Entering server info

    Entering server info, (Detailed guide)
    Credit to "hedo2002"

    Here is a "how to" for entering server info:

    Hit the menu button,
    navigate to the configuration menu,
    then navigate to the network settings menu hit OK
    you will now see a screen which should read DHCP and have the values filled in, (at least one DNS setting should be populated),
    Hit the BLUE button on the remote, enter password 0000 is default.
    You will now see a screen with 8 blank slots.
    Navigate to the first empty slot, hit OK
    you will now be presented with a screen with the following fields
    Server Name
    Port
    User name
    Password
    DES
    connect

    You are now ready to begin entering your server info.

    Navigate to the first space, hit OK on remote,
    enter server name or the IP using the remote and the on screen keyboard,
    Hit the RED button on the remote, (save), the info will be saved but it will not show on the screen. hit EXIT,
    navigate to the Port slot, enter the port info. Hit the EXIT button if you hit the RED button it will save and exit.
    navigate to the user name slot, enter your info, it IS case sensitive. hit the RED button then exit,
    navigate to the password slot, enter your info, it iS case sensitive, hit the RED button then exit,
    navigate to the DES slot, enter the info any letters will be UPPER case, hit the RED button and then exit.

    Now you can now navigate to the final slot press OK on the remote. You will see one of two messages.

    1. "Server is connected!" you may now exit the network settings, be sure to SAVE the settings when prompted on screen. In the network settings menu you will see a message, (lets say you have entered server info for 4 servers, and you have decided to "activate" 3 of them. The message will say connected (1,2,4), that is assuming these are the servers you have activated. Again exit saving when prompted. As long as your tuned to a working channel the pic should now appear.

    2. "server - can't connect" If you get this message, first do a hard reboot, (from the rear switch).
    If after rebooting the server still will not connect and your internet connection is ok. Then it is likely you have entered the info incorrectly and you must redo the settings. If after a couple of attempts then reboot your modem, then router then dreamlink, waiting approx 1 minute in between each reboot

    You should now be connected ENJOY.
    Last edited by vmagi; 08-08-2013 at 06:48 PM.

  2. #2
    Join Date
    Jan 2013
    Location
    https://t.me/pump_upp
    Posts
    2
    Satfix Buxs
    14
    Thanks
    2
    Thanked 4 Times in 1 Post

    Default

    Thanks - I borrowed this post.. Here is some more info that you may need.

    I found out that you need to do some additional saving in the Network Setting page after saving your Server Settings..

    Good Luck!
    Satbum

  3. The Following 4 Users Say Thank You to Satbum For This Useful Post:


  4. #3
    Join Date
    Sep 2012
    Posts
    16,241
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,704
    Thanked 27,828x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    easier loading info with usb

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  5. The Following 3 Users Say Thank You to dishuser For This Useful Post:


  6. #4
    Join Date
    Dec 2012
    Posts
    3
    Satfix Buxs
    16
    Thanks
    6
    Thanked 4x in 2 Posts

    Default

    Please explain how you load the info with the USB. Thanks.

  7. The Following 3 Users Say Thank You to jedrm For This Useful Post:


  8. #5
    Join Date
    Sep 2012
    Posts
    16,241
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,704
    Thanked 27,828x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    Quote Originally Posted by jedrm View Post
    Please explain how you load the info with the USB. Thanks.
    get make2dream_HD program

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  9. The Following 7 Users Say Thank You to dishuser For This Useful Post:


  10. #6
    Join Date
    Sep 2013
    Posts
    195
    Satfix Buxs
    340
    Thanks
    84
    Thanked 63x in 44 Posts

    Default

    Theres a id slot on the t5 in the server. What info goes in there?

  11. The Following 3 Users Say Thank You to Bill For This Useful Post:


  12. #7
    Join Date
    Sep 2012
    Posts
    16,241
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,704
    Thanked 27,828x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    Quote Originally Posted by Bill View Post
    Theres a id slot on the t5 in the server. What info goes in there?
    the username

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  13. The Following 3 Users Say Thank You to dishuser For This Useful Post:


  14. #8
    Join Date
    Sep 2013
    Posts
    195
    Satfix Buxs
    340
    Thanks
    84
    Thanked 63x in 44 Posts

    Default

    Intered server info and am getting can not connect to server.

  15. The Following 2 Users Say Thank You to Bill For This Useful Post:


  16. #9
    Join Date
    Dec 2012
    Posts
    21
    Satfix Buxs
    70
    Thanks
    23
    Thanked 11x in 5 Posts

    Default

    Quote Originally Posted by Bill View Post
    Intered server info and am getting can not connect to server.
    You probably have a typo in your info IF your server is active/subscribed. You cant see info after you enter it which is why the make2dream batch prog was made. its just txt file you CAN SEE server info and edit any mistakes and then load via usb stick to DL HD Rec.

  17. The Following User Says Thank You to hexflex For This Useful Post:


  18. #10
    Join Date
    Jan 2013
    Posts
    40
    Satfix Buxs
    107
    Thanks
    0
    Thanked 9x in 5 Posts

    Default

    Quote Originally Posted by vmagi View Post
    Entering server info, (Detailed guide)
    Credit to "hedo2002"

    Here is a "how to" for entering server info:

    Hit the menu button,
    navigate to the configuration menu,
    then navigate to the network settings menu hit OK
    you will now see a screen which should read DHCP and have the values filled in, (at least one DNS setting should be populated),
    Hit the BLUE button on the remote, enter password 0000 is default.
    You will now see a screen with 8 blank slots.
    Navigate to the first empty slot, hit OK
    you will now be presented with a screen with the following fields
    Server Name
    Port
    User name
    Password
    DES
    connect

    You are now ready to begin entering your server info.

    Navigate to the first space, hit OK on remote,
    enter server name or the IP using the remote and the on screen keyboard,
    Hit the RED button on the remote, (save), the info will be saved but it will not show on the screen. hit EXIT,
    navigate to the Port slot, enter the port info. Hit the EXIT button if you hit the RED button it will save and exit.
    navigate to the user name slot, enter your info, it IS case sensitive. hit the RED button then exit,
    navigate to the password slot, enter your info, it iS case sensitive, hit the RED button then exit,
    navigate to the DES slot, enter the info any letters will be UPPER case, hit the RED button and then exit.

    Now you can now navigate to the final slot press OK on the remote. You will see one of two messages.

    1. "Server is connected!" you may now exit the network settings, be sure to SAVE the settings when prompted on screen. In the network settings menu you will see a message, (lets say you have entered server info for 4 servers, and you have decided to "activate" 3 of them. The message will say connected (1,2,4), that is assuming these are the servers you have activated. Again exit saving when prompted. As long as your tuned to a working channel the pic should now appear.

    2. "server - can't connect" If you get this message, first do a hard reboot, (from the rear switch).
    If after rebooting the server still will not connect and your internet connection is ok. Then it is likely you have entered the info incorrectly and you must redo the settings. If after a couple of attempts then reboot your modem, then router then dreamlink, waiting approx 1 minute in between each reboot

    You should now be connected ENJOY.
    where do i get all the the info to enter below :
    server name ...
    port
    user name and etc....?

  19. The Following User Says Thank You to greeny For This Useful Post:


  20. #11
    Join Date
    Oct 2012
    Posts
    1,871
    Satfix Buxs
    12,439
    Thanks
    4,055
    Thanked 2,052x in 934 Posts

    Default

    Decide what sats you want, communicate by pm with a p$ of your choice from the iks section, send him some cash and he will pm you back the server name, port, use name , etc. good luck

  21. The Following User Says Thank You to whoknows For This Useful Post:


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •