Hi Guy's what transponder do Use to setup the 118.7 satellite, for the highest quality, for all TP's.
Hi Guy's what transponder do Use to setup the 118.7 satellite, for the highest quality, for all TP's.
Try TP11806R, it has the "You Have A Dish At 118W" channel on it (CH# 9583) and is an open channel, all the others are CONUS, same levels all over.
And some places may need a bigger dish for 118 as it is about 1/2 the output power of 119, take a look at the link below, it will give you an estimated dish size needed for 118 at your location, Zoom into your location and click on it.
Code:http://www.satbeams.com/footprints?norad=31102
♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫
Coming soon to a crop circle near you.....
There is a 66 and third % chance that I'm on the right planet...
"I'm happier then a Jackalope in a balloon factory"
"First rule of testing satellites"
"If its working fine now, then don't mess with it"
"Second rule of testing satellites"
"If you did mess with it, and now it doesn't work, can you blame someone else?"
"Third rule of testing satellites"
"If you did mess with it, and it doesn't work now, and you can't blame someone else"
"Can you HIDE it"?
If you set up 119 you will get 118.8!
its a circular, fss band lnb you should look for. also i use a 18'' dish here in the upper midwest and pull 118 in with readings in the mid 70s, 80,s just toy around with it see what works in your area. just change lnb freq to 10750 point at 119 and then you should have 118 as well you may need to do fine tuning for 118 as it is a narrow beam compared to 119
Last edited by rambos420; 08-16-2014 at 01:35 PM.