Page 2 of 4 FirstFirst 1234 LastLast
Results 16 to 30 of 51

Thread: 82 degrees

  1. #16
    Join Date
    Dec 2012
    Posts
    1,365
    Satfix Buxs
    7,987
    Thanks
    9
    Thanked 1,523x in 764 Posts

    Default

    I've read both now, and heck if I know! If the prov box gets it (82 degree TP 12530) OK, but the other boxes don't, then that implies all dishes are well pointed and cables are OK. But what could the prov box do that your boxes do not? I suppose there could be a single cable that has an odd dip in the response curve that could be an issue, but if there are two diff cables with similar issue, that would not seem to be the case. Maybe some issue with passing 22kHz pulses so that the switch does not always do what it should, but again two cables with same issue--odds are not--though maybe the 22kHz pulse levels on prov box differ from the FTA boxes. LNB LO could have drifted, but on two diff dishes--odds are not in the same way or the same amount and it would affect more than one TP.
    That the prov box gets it, also suggests no terrestrial RFI issue.
    Pretty much says that all possible issues are not a factor and you should have no problem.
    Could be an odd corrosion on cable connectors at the box or some issue within the cable. Possible LNB voltage issue.

    This post suggests others with the issue too:
    http://www.satfix.to/showthread.php?...33#post1225433
    Last edited by jvvh5897; 03-31-2017 at 04:23 PM.

  2. #17
    Join Date
    Oct 2012
    Posts
    30
    Satfix Buxs
    791
    Thanks
    4
    Thanked 4x in 3 Posts

    Default

    Yes you are correct. That other thread is going on the same direction.

    I need to get this tested on a legacy LNB directly to the receiver and see if the same issue exists.
    So far, I'm thinking some kind of odd DPP issue since all these instances (in this case) involve DPP equipment.
    When I get a chance to test, I will report back. In the meantime, any other input is welcomed.
    Thank you for your reply.

  3. #18
    Join Date
    Oct 2012
    Posts
    30
    Satfix Buxs
    791
    Thanks
    4
    Thanked 4x in 3 Posts

    Default

    http://www.satfix.to/showthread.php?...66#post1225466
    Check here and lets work on this together?
    Do you have DPP equipment on your dish?

  4. #19
    Join Date
    Sep 2016
    Posts
    69
    Satfix Buxs
    557
    Thanks
    0
    Thanked 5x in 4 Posts

    Default

    what a dpp equipement ?

  5. #20
    Join Date
    Oct 2012
    Posts
    30
    Satfix Buxs
    791
    Thanks
    4
    Thanked 4x in 3 Posts

    Default

    Your LNB's on your dish. What kind are they?

  6. #21
    Join Date
    Sep 2016
    Posts
    69
    Satfix Buxs
    557
    Thanks
    0
    Thanked 5x in 4 Posts

    Default

    i have a 3 lnb (standard ones)

  7. #22
    Join Date
    Oct 2012
    Posts
    30
    Satfix Buxs
    791
    Thanks
    4
    Thanked 4x in 3 Posts

    Default

    Then you must not have the same setup as the issue I am having. What you pointing at with 3 LNB and 82w in the equation?

  8. #23
    Join Date
    Sep 2016
    Posts
    69
    Satfix Buxs
    557
    Thanks
    0
    Thanked 5x in 4 Posts

    Default

    so if i understand ..to not be capable to scan mlb networkchannel...the reason is the transponder not the receiver or lnb's ?

  9. #24
    Join Date
    Oct 2012
    Posts
    179
    Satfix Buxs
    21,224
    Thanks
    39
    Thanked 295x in 113 Posts
    Items Immunity to TheftCamaro
Gift received at 07-13-2015, 04:02 PM from nob0dyBox of crap
Gift received at 07-13-2015, 04:02 PM from nob0dyCrown Royal
Gift received at 06-30-2015, 05:08 PM from nob0dy
Message: have a drink on me ;DHookah
Gift received at 06-30-2015, 05:08 PM from nob0dyACDC
Gift received at 06-30-2015, 05:08 PM from nob0dyWhiskey
Gift received at 05-02-2015, 08:22 PM from nob0dy

    Default

    Post the Transponder number that it's suppose to be on and what channel number it's suppose to scan in as.

  10. #25
    Join Date
    Sep 2016
    Posts
    69
    Satfix Buxs
    557
    Thanks
    0
    Thanked 5x in 4 Posts

    Default

    do you have a better place than lyngsat to check list of satellites and transponders ...i will post what i want ....on lyngsat i see nothing about mlb network in HD ....

  11. #26
    Join Date
    Sep 2016
    Posts
    69
    Satfix Buxs
    557
    Thanks
    0
    Thanked 5x in 4 Posts

    Default

    i will post what YOU want ...sorry

  12. #27
    Join Date
    Dec 2012
    Posts
    1,365
    Satfix Buxs
    7,987
    Thanks
    9
    Thanked 1,523x in 764 Posts

    Default

    If you have the box settings correct, then my best guess is that the TP is weak or failing at the satellite. The prov box may have better low level response and can pull it out of the grass where your FTA boxes do not. It really is the last possibility. Maybe go with a bigger dish would be a fix.

  13. #28
    Join Date
    Oct 2012
    Posts
    30
    Satfix Buxs
    791
    Thanks
    4
    Thanked 4x in 3 Posts

    Default

    If you read in the other thread, I've already been working on this and I think all the info is there.

  14. #29
    Join Date
    Oct 2012
    Posts
    30
    Satfix Buxs
    791
    Thanks
    4
    Thanked 4x in 3 Posts

    Default

    12530 on 82w. Sid 1420.

  15. #30
    Join Date
    Sep 2016
    Posts
    69
    Satfix Buxs
    557
    Thanks
    0
    Thanked 5x in 4 Posts

    Default

    i saw it and tried it ....no result....and on lyngsat these infos are not for mlb network channel...they are for cbssports network canada and cooking channel canada !!....

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •