he will,we are expecting bad weather here,and he does appreciate any help given,he wants to change out the lnb next time up the ladder.Thank you every one for your help,I will update
he will,we are expecting bad weather here,and he does appreciate any help given,he wants to change out the lnb next time up the ladder.Thank you every one for your help,I will update
I think there's something wrong with the T5,I hooked up his old dreamlink,scanned 12.224 got 21 channels blue bars before during and after scan. I notice small lines running horizontaly across the screen occasionally,I think this box may have a grounding issue or something. He may call the supplier to try to exchange the unit
I emailed the dealer he got the T5 from,heres his response...
If you are getting any channels the dreamlink is not defective.
>
> Check the following.
> 1. Do not use DP plus or DP pro plus LNBS with dreamlink T5.
> 2. Some switches are not compatible with T5. Ifyou have EMP Centauri replac=
> e it with other brand.
> That does not mean the switch is defective. It is just incompatible.
my switches are EMP Centauri
The T5 does not like Emp centauri switches,we replaced with royal switches and now scans all tp's
this box still gets faint horizontal lines running up and down screen,especially on HD channels,could this be a ground issue?
Maybe a resolution setting issue between TV and box--say if one were set for 520 and the other 1070 (can't really recall the real pixel counts allowed for TVs these days). Some sort of conversion issue going from a source that is 760 to force it to be 1070?
Last edited by jvvh5897; 05-09-2017 at 04:26 PM.