Results 1 to 10 of 10

Thread: Can't tune in 119 sat? help with settings

  1. #1
    Join Date
    Dec 2012
    Posts
    65
    Satfix Buxs
    477
    Thanks
    9
    Thanked 4x in 4 Posts

    Default Can't tune in 119 sat? help with settings

    Hi
    moved the dish...
    can't tune in 119......spent alot of time with no results....i just don't get it.....
    Could some please check their 119 pid settings....maybe something is off

    my settings are.::::sat 119
    freq.....12.224 gz
    symbol rate.....20.000 ms/s
    polarity......V
    transmission......turbo8psk
    pilot .....off
    fec........auto
    video pid....auto
    If these setting are OK....could you let me know.........going nuts.....
    thks
    joke

  2. #2
    Join Date
    Oct 2009
    Posts
    9,003
    Satfix Buxs
    4,002,465
    Thanks
    3,658
    Thanked 8,666x in 3,246 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default

    Well I see one thing wrong, TP 12224 is a spot beam meant for certain locations, use TP 12414 it is a CONUS beam that covers a very large area, you should have no problems with that one.
    ♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫



    Coming soon to a crop circle near you.....

    There is a 66 and third % chance that I'm on the right planet...

    "I'm happier then a Jackalope in a balloon factory"

    "First rule of testing satellites"
    "If its working fine now, then don't mess with it"

    "Second rule of testing satellites"
    "If you did mess with it, and now it doesn't work, can you blame someone else?"

    "Third rule of testing satellites"
    "If you did mess with it, and it doesn't work now, and you can't blame someone else"
    "Can you HIDE it"?

  3. The Following 2 Users Say Thank You to Terryl For This Useful Post:


  4. #3
    Join Date
    Dec 2012
    Posts
    65
    Satfix Buxs
    477
    Thanks
    9
    Thanked 4x in 4 Posts

    Default

    T...
    while we're at it.....under dish settings.....what is the LNB FREQuecy......i have 11.20......is that correct

  5. #4
    Join Date
    Sep 2012
    Posts
    16,242
    Satfix Buxs
    2,380,488,878,337
    Thanks
    23,716
    Thanked 27,831x in 10,218 Posts
    Items DevilBeef
Gift received at 01-24-2014, 04:26 PM from swanner
Message: Thanks for Your Input, with all the Hot Heads around.. Should be cooked in No Time..LOLDish
Gift received at 12-15-2013, 09:10 PM from holly2012
Message: From an Old FriendDog
Gift received at 10-30-2013, 12:15 AM from Just_angel
Message: love chloe xoxoxWhiskey
Gift received at 03-27-2013, 03:33 PM from thebeav
Message: found this behind the dumpster at the casino when i was looking for W H :)Heart
Gift received at 11-20-2012, 12:22 PM from Just_angel
Message: x0x0A Beer
Gift received at 11-06-2012, 03:58 AM from Styx_N_Stones
Message: I seem to have accumulated too many beers... LOL!Crown Royal
Gift received at 10-11-2012, 03:49 PM from Just_angel

    Default

    symbol rate.....20.000 ms/s should be 21500

    DODGE the father

    RAM the daughter



    “Always do sober what you said you'd do drunk. That will teach you to keep your mouth shut.”

  6. The Following 2 Users Say Thank You to dishuser For This Useful Post:


  7. #5
    Join Date
    Oct 2009
    Posts
    9,003
    Satfix Buxs
    4,002,465
    Thanks
    3,658
    Thanked 8,666x in 3,246 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default

    Quote Originally Posted by jokeonyou View Post
    T...
    while we're at it.....under dish settings.....what is the LNB FREQuecy......i have 11.20......is that correct

    It should be 11250
    ♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫



    Coming soon to a crop circle near you.....

    There is a 66 and third % chance that I'm on the right planet...

    "I'm happier then a Jackalope in a balloon factory"

    "First rule of testing satellites"
    "If its working fine now, then don't mess with it"

    "Second rule of testing satellites"
    "If you did mess with it, and now it doesn't work, can you blame someone else?"

    "Third rule of testing satellites"
    "If you did mess with it, and it doesn't work now, and you can't blame someone else"
    "Can you HIDE it"?

  8. #6
    Join Date
    Sep 2017
    Posts
    6
    Satfix Buxs
    33
    Thanks
    0
    Thanked 1 Time in 1 Post

    Default

    Quote Originally Posted by jokeonyou View Post
    Hi
    moved the dish...
    can't tune in 119......spent alot of time with no results....i just don't get it.....
    Could some please check their 119 pid settings....maybe something is off

    my settings are.::::sat 119
    freq.....12.224 gz
    symbol rate.....20.000 ms/s
    polarity......V
    transmission......turbo8psk
    pilot .....off
    fec........auto
    video pid....auto
    If these setting are OK....could you let me know.........going nuts.....
    thks
    joke
    did U get your answer ???
    if not and still have problems...symbol rate.....20.000 ms/s..does NOT go with transmission......turbo8psk
    U should ADD anoder TP 12224...Symbol rate 21.500 and transmission......turbo8psk ..yhey go together..
    Thev U could test different polarity...and one of them will come-up..
    good-luck
    It should be OK...I know ...I had the same problem..
    There could be others TP's with the same issues...
    Follow the same proceedure.

  9. #7
    Join Date
    Dec 2012
    Posts
    65
    Satfix Buxs
    477
    Thanks
    9
    Thanked 4x in 4 Posts

    Default

    hi again..
    ok........this is getting very hard to discern......
    could u pls. give me your settings under manual scan or pid scan.......
    my tp12224 comes up under the freq. as number 54....it reads....21500 ms....polarity = V......and the transmission = DVBS QPSK..
    i have noticed as i change the freq. tps.....that this goes in and out of turbo8psk and dvbsqpsk..........
    does any of this make sense???
    I figure if i have your complete settings under manual scan ....i hope this is the one to work on ....that i might get something that will allow the sat dish to tune in to 119...and i get a blue signal instead of always red......no connection...
    OR....should i just do a complete reset on the receiver
    best to you all
    joke

  10. #8
    Join Date
    Oct 2009
    Posts
    9,003
    Satfix Buxs
    4,002,465
    Thanks
    3,658
    Thanked 8,666x in 3,246 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default

    Quote Originally Posted by jokeonyou View Post
    Hi
    moved the dish...
    can't tune in 119......spent alot of time with no results....i just don't get it.....
    Could some please check their 119 pid settings....maybe something is off

    my settings are.::::sat 119
    freq.....12.224 gz
    symbol rate.....20.000 ms/s
    polarity......V

    transmission......turbo8psk
    pilot .....off
    fec........auto
    video pid....auto
    If these setting are OK....could you let me know.........going nuts.....
    thks
    joke
    Again...You will not see anything on satellite 119 with those TP settings, (12224) it needs to be set to 12414.

    And symbol rate needs to be .....21.500 ms/s
    and polarity needs to be H (or L)

    It should look like this..

    Your settings should be.::::sat 119
    freq.....12.414 ghz
    symbol rate.....21.500 ms/s
    polarity......H
    transmission......turbo8psk
    pilot .....off
    fec........auto
    video pid....auto
    Last edited by Terryl; 11-26-2017 at 07:12 PM.
    ♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫



    Coming soon to a crop circle near you.....

    There is a 66 and third % chance that I'm on the right planet...

    "I'm happier then a Jackalope in a balloon factory"

    "First rule of testing satellites"
    "If its working fine now, then don't mess with it"

    "Second rule of testing satellites"
    "If you did mess with it, and now it doesn't work, can you blame someone else?"

    "Third rule of testing satellites"
    "If you did mess with it, and it doesn't work now, and you can't blame someone else"
    "Can you HIDE it"?

  11. #9
    Join Date
    Dec 2012
    Posts
    65
    Satfix Buxs
    477
    Thanks
    9
    Thanked 4x in 4 Posts

    Default

    Terryl
    to change to the setting above i have to go to frequency and move it to number 19...then change all the other data.....is that what you have to do????
    because if i just turn to PID on the 119 sat ........i get the number 1 freq. which is 12.297...sym rate..is 20000 ms/s Polarity is H and Transmission is set at dbvs qpsk.......
    I have done a factory reset .....................i am having no problems getting 110 to come in.....all in default....didn't have to mess with any of the settings.....BUT....119 .....just won't come in..
    still at a loss......
    So if i go to number 14 and use your setttings and leave it on that screen on the TV....then go outside and try to tune the dish...will it come in???????
    thk
    j

  12. #10
    Join Date
    Oct 2009
    Posts
    9,003
    Satfix Buxs
    4,002,465
    Thanks
    3,658
    Thanked 8,666x in 3,246 Posts
    Items PhoneHeartVintage truck
Gift received at 12-23-2012, 09:06 AM from ICEMAN
Message: thank you budTVCoffee makerPinkfloydthe travel gnomeTractor

    Default

    I don't have your type of receiver, but the settings are all the same.

    On 110 the default TP is 12224 and that is a CONUS beam.

    12224 on 119 is a spot beam, and may not be active in your area, that's why I told you about the other TP 12414.
    ♫♫♫ I’m a lumberjack and I’m OK ♫♫♫ I drink all night and sleep all day. ♫♫♫



    Coming soon to a crop circle near you.....

    There is a 66 and third % chance that I'm on the right planet...

    "I'm happier then a Jackalope in a balloon factory"

    "First rule of testing satellites"
    "If its working fine now, then don't mess with it"

    "Second rule of testing satellites"
    "If you did mess with it, and now it doesn't work, can you blame someone else?"

    "Third rule of testing satellites"
    "If you did mess with it, and it doesn't work now, and you can't blame someone else"
    "Can you HIDE it"?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •