119 and 110 in bracket on standard dish DN

[Jlude]

Hi, I have a dish thats been on the roof for a while, it has the bracket that holds 2 lnb's 1 for 110 and the other for 119.

When I do a channel scan I get all of 110, when I try to scan 119 there is signal but no quality and no channels?

I am using a diseq switch with 110 on port 1 and 119 on port 2.

Has something changed with the lnb needed to receive 119w in the last 3 years? the lnb i am using is 11250 12.2 - 12.7 ghz...

any help is appreciated.

thank you

[nixon_r]

Check the connections on the 119 LNB, look for corrosion inside the connector. You could try to switch the LNBs around to see if it is the LNB itself.

[Jlude]

I tried that but still the same scenerio. I think I may need the 10750 frequency for 118 and 119. Can anyone confirm this??

[dishuser]

I tried that but still the same scenerio. I think I may need the 10750 frequency for 118 and 119. Can anyone confirm this??
ya you do need that

[abby]

also check switch may be bad or dish may have moved a bit.