Connecting two dishes

[papito]

Can anyone tell me how to connect a dish 500(91,82)to a dish 1000.4(77,72.7,61.5).Idon't know if is possible ,and how,to send the signal to one receiver(Freesat 800 hd),thanks in advance.

[Terryl]

Use a 22 KHz switch on the outputs of the LNB's, 22 KHz on= 82/91, 22 KHz off = 61.5, 72.7, 77.

But I hope your receiver can handle the DC load of the D1000 LNB.

[papito]

So,how is going to be the set up in the receiver?what ports would i use?thanks.

[Terryl]

Lets see, maybe something like this.


Sat – 82.0W
Transponder- 12224V 20000 5/6
LNB Power – 13/18V
LNB Type- Standard 11250
LNB 22KHZ - on
Switch type - DiSEqC

Diseqc - 2

Legacy SW – off



Sat – 91.0W
Transponder- 12224V 20000 5/6
LNB Power – 13/18V
LNB Type- Standard 11250
LNB 22KHZ - on
Switch type - DiSEqC

Diseqc - 1

Legacy SW – off




Sat – 77.0W
Transponder- 12224V 20000 5/6
LNB Power – 13/18V
LNB Type- Standard 11250
LNB 22KHZ - off
Switch type - DiSEqC

Diseqc - 1

Legacy SW – off


Sat – 72.7W
Transponder- 12224V 20000 5/6
LNB Power – 13/18V
LNB Type- Standard 11250
LNB 22KHZ - off
Switch type - DiSEqC

Diseqc - 2

Legacy SW – off

Sat – 61.5W
Transponder- 12224V 20000 5/6
LNB Power – 13/18V
LNB Type- Standard 11250
LNB 22KHZ - off
Switch type - DiSEqC

Diseqc - 3

Legacy SW – off


It may differ on your receiver.

[papito]

thank you very much ,I' ll try that.

[navigates]

Use a 22 KHz switch on the outputs of the LNB's, 22 KHz on= 82/91, 22 KHz off = 61.5, 72.7, 77.
But I hope your receiver can handle the DC load of the D1000 LNB.

Is there any reason you are recommending 22hrz tonal switch over SW-21X. Is the tone switch better. I have the sw21x with a disecq and it seems to be working.