Loader para Limesat Ultra

[cicuta]

Trate de poner el Factory file a una Limesat Ultra via USB,pero falla la transmicion dl archivo,he tratado muchas veces y no he tenido exito.

Ahora quiero tratar con de loader y pido por favor si alguien tiene las instrucciones para usarlo,me de una ayuda para poder cargarle el file a mi STB.

PD; se pasaba mencionar que los cables NULL que he tratado son de
SonicView
Viewsat
CaptiveWorks y Satzen
No se cual sea el correcto

se los agradesco de antemano

suerte y saludos

[cicuta]

encontre las Instrucciones y las comparto con quien las necesite y los que no tambien,jaja

c/p from another site
thanks to Kung Fu
You will need a Null modem Cable, a 9 pin Serial Port on your Computer and set to Port 1. If your Computer has no Serial port then you will need to to use a USB to serial Adapter connected to your PC, then connected to the Null Modem Cable then connect to your receiver

make sure you have unzipped or extracted your file with winrar or winzip

open loader exe browse to find the file



1) Download and install the Limesat HD RS232 Loader on your Desktop
2) Find the Limesat HD Bin[For Your STB] and click open
3) Turn off the Receiver
4) Press and Hold the Power Button on the Front (|) and turn on the Rear Switch
5) Wait for Boot to be displayed on the Receiver Front Panel

press start on the loader

(6) Bin will Start loading
7) Once it starts to load do not interrupt it.
8) When Done it should reboot, wait until it's finished then unplug the Null modem cable
9) Go to Menu and insure [Your Bin ] is loaded

From now on any new bin can be loaded via the Front USB Port

PD; pueden cerrar el tema,gracias:innocent:

suerte y saludos