Dish size for 72.7w in Canada

[piperider]

Im gonna try to pick up 72.7w im in nova scotia what size dish do i need will a 20inch work thanks

[saulin]

Check on hxxp://www.satbeams.com

Choose footprints, select the sat and your location

[bkr™]

Looking at your location, (doing some quick crunching of #s) with a single circular type lnb on a 20" dish, you should hit 72.7°w. Your az would be @ 210.9° magnetic and elevation @ 37.8°, well within the parameters needed.

[piperider]

Thanks guys really appreciate it

[Dynas]

I`m in New Brunswick and use a 24" dish for 72.7 and get a great signal.I have tried a 18" and the signal was still very good.

[suri]

I`m in New Brunswick and use a 24" dish for 72.7 and get a great signal.I have tried a 18" and the signal was still very good.
I am able to lock in on this sat & on the right side it says AMC6 (c) ,if its ok like I read in different posts, with s 65 but on scanning I get nothin, absolutely nothing.Could somebody let me know what can be wrong,thanks.

[tomkatt11]

if your using a sonic view 8000 you need to scan with bin 14 . then you can switch to newest bin to watch.

[karunale]

can some 1 guide me where is this bin file 14 file thanks

[dishuser]

can some 1 guide me where is this bin file 14 file thanksthat post is over 5 years old

[karunale]

Do we have bin 14 file on this site ?

[dishuser]

Do we have bin 14 file on this site ?

I suggest you read some "newer" threads in the sv 8000 section