Power Inserter and SW21, Which is first?

[Jerasa]

I have dish 1000+ and DPP44 and a power inserter and a SW21 to add 82W and 91W... how do I hook them up all together? which is first? will the SW21 pass the power from the power inserter if it's installed before the switch? thx

[Terryl]

Some SW21's have a power pass side, but the power inserter should go to the LNB directly, on port #1 of the LNB.

Then you can run the switch and receiver off port #2 of LNB, then the switch wont have to have the DC power going through it.

Use the LNB input on the D1000 LNB for 82W, and the other side of the switch for 91W.

This way it will be 119, 110, 129, 82 off the D1000 LNB and 91 off the 22 KHz side of the switch.

[Jerasa]

Got it... ;)