Sp0iler
10-01-2012, 10:32 AM
Force load the factory bin or any file....
Load the file to your usb stick.
Insert the stick and shut the box off from the rear switch.
While holding the "ok" (for the 8k use the menu button) button in on the box, restart from the rear switch.Hold the "ok" (for the 8k use the menu button) button for at least 5 seconds when you boot from the rear.
This will put the box in USB mode and you can use the buttons on the box to navigate and force load the file.When your in usb mode,"USBL" (360's) will be displayed on the the box.
Restart as normal and load the current file for your box .
If your on component video, you'll need to downgrade to standard video (yellow output) to see the Usb mode screen.
Good luck,
Sp0iler
Load the file to your usb stick.
Insert the stick and shut the box off from the rear switch.
While holding the "ok" (for the 8k use the menu button) button in on the box, restart from the rear switch.Hold the "ok" (for the 8k use the menu button) button for at least 5 seconds when you boot from the rear.
This will put the box in USB mode and you can use the buttons on the box to navigate and force load the file.When your in usb mode,"USBL" (360's) will be displayed on the the box.
Restart as normal and load the current file for your box .
If your on component video, you'll need to downgrade to standard video (yellow output) to see the Usb mode screen.
Good luck,
Sp0iler