Dreamlink hd red and green light flashing box not working

[tinufta]

Dreamlink hd red and green light flashing box not working.
Just as the title says any suggestions ?

[lobsterpot]

did you unplug it for a while? let it cool down .

[KIDWCKED]

If you have made any changes regarding connections,and didn't pwr off at the back you could be beat..

[tinufta]

If you have made any changes regarding connections,and didn't pwr off at the back you could be beat..

I unplugged everything and power was turned off from the back as well.

[yazz]

disconnect the module and see if it works. could be a case of bad module.

[WatchingTV]

At one time there was a post (now gone) of how to enter the diagnostic function of the box. It was by holding some buttons on the front of the unit while turning it on.
Hopefully someone else has the info and will post it again.

[KIDWCKED]

At one time there was a post (now gone) of how to enter the diagnostic function of the box. It was by holding some buttons on the front of the unit while turning it on.
Hopefully someone else has the info and will post it again.



If you turn the receiver on with the rear power switch, and then quickly press either of the front panel channel buttons a few times, you will enter into a diagnostic menu.

Some options to test or show status of LNB's, audio, video, usb, rs232 etc.

To exit the menu, I choose option 8, reset the box to default. Maybe there's another way, but turning the box off at the back doesn't exit the menu.

[alpine]

you might have a bad module.when i install the green one i hard problems now i have the red its running good.

[r\rafa]

Check for power cycling on this site ..... It have worked for a lot of people. Good luck
http://www.satfix.net/showthread.php?122047-Power-cycling-solution