3 signals for 3 receiver

[chichitsai]

I currently have
110/119/129 on an elliptical dish. I have 2 receivers so therefore 2 of the diseqc 4x1 switch.
where Port 1 for 110, port 2 for 119 and port 3 for 129 (all that 2 times) with 2 cables coming into my house.
Now I will like to add a 3rd receiver to my house and since there is only 2 signals per lnb, is there a way?
I understand that I will definitely need a third line into my house.

[marcel.crash]

I currently have
110/119/129 on an elliptical dish. I have 2 receivers so therefore 2 of the diseqc 4x1 switch.
where Port 1 for 110, port 2 for 119 and port 3 for 129 (all that 2 times) with 2 cables coming into my house.
Now I will like to add a 3rd receiver to my house and since there is only 2 signals per lnb, is there a way?
I understand that I will definitely need a third line into my house.

yes you can you can use 3 multiswitch you put two cables from the 119 lnb to the switch and you get four 119 do that to each lnb then you will have four 119. 110. and four 129 you run one cable from each switch to the three disecq switchs .

you can also use the sw64 switch all three lnbs go into the 64 switch now you get 4 feeds with the 3 sats on ech feed . the diagrams are backwards in the picks the thumbnail is for the 64 switch



16425164261642716428

[steven charles]

I currently have
110/119/129 on an elliptical dish. I have 2 receivers so therefore 2 of the diseqc 4x1 switch.
where Port 1 for 110, port 2 for 119 and port 3 for 129 (all that 2 times) with 2 cables coming into my house.
Now I will like to add a 3rd receiver to my house and since there is only 2 signals per lnb, is there a way?
I understand that I will definitely need a third line into my house.friend if you have dpp or dp lnbs on your dish, you can use a dp44 switch,and looking on your ports,its sat 110 with port 2 and sat 119 with port 1 and sat 129 with port 3,good luck friend....