Log in

View Full Version : where i can input iksr.tv?



newer
10-19-2012, 02:13 AM
my sonicview 360p setting
server type=private server 1
status= connect................(not connected)
setting type = DHCP
local IP=xxxxxxxxxxxxxxxx
subnet=xxxxxxxxxxxxxxxxx
gateway=xxxxxxxxxxxxxxx
DNS IP 75.75.75.75
retry timout 12
Use name 89xxxxxxxxxxxxxx
Pasword xxxxxxxxxxxxxxxxx
use DNS NO
server IP 37-46-112-204
Server port 35933
Des key xxxxxxxxxxxxxxxxxx
i have no place to input iksr.tv?if use DNS i put yes and input iksr.tv ,Tatus will said connection fail?
thank you much

dishuser
10-19-2012, 02:15 AM
change server ip to domain then enter it

newer
10-19-2012, 03:56 AM
i try all botton but can't charge to domain?i can only change number? <br />
thanks

turtlen
10-19-2012, 04:16 AM
on sonicview 360 premiere put use dns to yes and imput in iksr.bz thats what i put in my sonicview, i'm not sure if iksr.tv is workin
but on mine iksr.bz works,hope this helps you out,.

newer
10-19-2012, 05:06 AM
i did try dns to yes then enter iksr.bz but Tatus showing connection fail?
thanks for reply

Anubis
10-19-2012, 12:09 PM
Reboot your router, modem and box. You should always do this when you change info when not connected. It usually will then connect.

Gamer
10-19-2012, 03:39 PM
i did try dns to yes then enter iksr.bz but Tatus showing connection fail?
thanks for reply

You are getting connect fail due to your code is not active or you have a mistake in your info.Verify your user,pass,port and deskeys to make sure you don't have a wrong digit.

newer
10-20-2012, 06:28 AM
DD-WRT router give me problem, been couple years i forgot how to setup?after set backup enter new IP rocket fly again
thank you so much all your help:yeaah: