Dreamlink HD with Beverly Antennas

[coqcalitey]

I have Antenna installed by the provider with 91-82.
I cannot get full signal on both, I m always missing channels or missing H or V frequencies.
P.S signal is fine with provider s receiver.

even thou it is not a diseqc, the receiver sees the signal as if a diseqc was used.

I tried to to choose Sw21,44,64, still missing frequencies.

I know there is no issue using diseqc but can Dreamlink ever be compatible with those provider switches?

[Terryl]

What type LNB(s) are on the dish?

A photo of them would help.

[pugsycan]

As Terry says pics would help Now that said You know this provider has started to use dishpro lnbs right and that would change the settings
I have Antenna installed by the provider with 91-82.
I cannot get full signal on both, I m always missing channels or missing H or V frequencies.
P.S signal is fine with provider s receiver.

even thou it is not a diseqc, the receiver sees the signal as if a diseqc was used.

I tried to to choose Sw21,44,64, still missing frequencies.

I know there is no issue using diseqc but can Dreamlink ever be compatible with those provider switches?


What type LNB(s) are on the dish?

A photo of them would help.

[dishuser]

I have Antenna installed by the provider with 91-82.
I cannot get full signal on both, I m always missing channels or missing H or V frequencies.
P.S signal is fine with provider s receiver.

even thou it is not a diseqc, the receiver sees the signal as if a diseqc was used.

I tried to to choose Sw21,44,64, still missing frequencies.

I know there is no issue using diseqc but can Dreamlink ever be compatible with those provider switches?

dp is diseqc
not sw
use dp settings for lnb type

[coqcalitey]

cannot get the pic of the antenna yet but the installation made last year for 2wo receivers to receive 91 and 82.
it s a dual lnb.
Dishuser, with the Dreamlink, the antenna type is ; Single, Unniversal, OCS, OCS-DP, Legacy twin LNB1, Legacy twin LNB2, Legacy Quad LNB1,Legacy twin LNB2.

[dishuser]

cannot get the pic of the antenna yet but the installation made last year for 2wo receivers to receive 91 and 82.
it s a dual lnb.
Dishuser, with the Dreamlink, the antenna type is ; Single, Unniversal, OCS, OCS-DP, Legacy twin LNB1, Legacy twin LNB2, Legacy Quad LNB1,Legacy twin LNB2.
ocs-dp is the one

[zahoor]

go to channels scane and change scan fta to scan all. scan and watch tv.

[whositwhatnow]

You most likely using an sw21 switch with legacy lnbs.

[coqcalitey]

@DishUser : Choosing OCS-DP - 11250 fixed the issue. I also found that ;
TP Settings for Sats

B*V 91
Sat Name: Nimiq 1/3
Transponder: 12224
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

B*V 82
Sat Name: Nimiq 2
Transponder: 12224
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

D*SH 110
Sat Name: Echostar 8/10
Transponder: 12224
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

D*SH 119
Sat Name: Echostar 7
Transponder: 12239
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

D*SH 148
Sat Name: Echostar 1/2
Transponder: 12224
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

D*SH 129
Sat Name: Echostar 5
Transponder: 12282
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

D*SH 121 (if using Standard)
Sat Name: Echostar 9
Transponder: 11724
LNB Type: Standard
LNB Freq: 10750

D*SH 121 (if using Universal)
Sat Name: Echostar 8/10
Transponder: 11724
LNB Type: Universal
LNB Freq Lo: 9750
LNB Freq Hi: 10600

D*SH 118
Sat Name: Anik F3
Transponder: 11715
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 10750

D*SH 105 (if using Standard)
Sat Name: AMC 15
Transponder: 11740
LNB Type: Standard
LNB Freq: 10750

D*SH 105 (if using Universal)
Sat Name: Echostar 8/10
Transponder: 11740
LNB Type: Universal
LNB Freq Lo: 9750
LNB Freq Hi: 10600

D*SH 61.5
Sat Name: Echostar 3
Transponder: 12297
LNB Type: Standard (if using Legacy), OCS-DP (if using d*sh Pro)
LNB Freq: 11250

GALAXY 10 (if using Standard)
Sat Name: Galaxy 10R
Transponder: 11800
LNB Type: Standard
LNB Freq: 10750

GALAXY 10 (if using Universal)
Sat Name: Galaxy 10R
Transponder: 11800
LNB Type: Universal
LNB Freq Lo: 9750
LNB Freq Hi: 10600

AMC-4 (if using Standard)
Sat Name: AMC 4 Ku
Transponder: 11983
LNB Type: Standard
LNB Freq: 10750

AMC-4 (if using Universal)
Sat Name: AMC 4 Ku
Transponder: 11983
LNB Type: Universal
LNB Freq Lo: 9750
LNB Freq Hi: 10600

GALAXY 25 (if using Standard)
Sat Name: Galaxy 25
Transponder: 12177
LNB Type: Standard
LNB Freq: 10750

GALAXY 25 (if using Universal)
Sat Name: Galaxy 25
Transponder: 12177
LNB Type: Universal
LNB Freq Lo: 9750
LNB Freq Hi: 10600
I hope this helps some people