PDA

View Full Version : Please can you help?



JaneyPhung
10-23-2012, 03:07 AM
Sorry, I am newbie to this. I have a Satzen Z500 and I can't hear the sound very well (only can hear 10%). I am using the NFPS which will expire soon ( I have to renew it shortly, but I don't know where or whom to contact).
I need to buy a new box and I don't know which model is a good one to buy. As I understood LimeSat Air HD is one of the best choice with WIFI (without the cable from the receiver to the router). Is there another receiver that is wireless? If not, is there another model that you can suggest me ?

Please help thank you

poppy
10-23-2012, 01:46 PM
Are you looking for hd or sd receiver.

whoknows
10-23-2012, 02:05 PM
Not sure how many boxes have wifi, but if you were to use power line adapters, then you can use receiver of your choice and use it in any room in the house. The router plugs into one adapter and the receiver plugs into the other.

http://images10.newegg.com/ProductImageCompressAll300/33-122-318CVF-01.jpg

JaneyPhung
10-23-2012, 02:26 PM
Are you looking for hd or sd receiver.

I don't have the HD component on the DISH outside yet but can I still use the HD receiver and install the HD component later on? I saw Limesat WiFi/3G Antenna Board For Limesat HD Air AND Vonets WiFi Bridge and I don't know which to buy to have wireless.

Thank you for helping me

poppy
10-23-2012, 04:15 PM
you can buy a nextfta which is hd with wifi,it is cheaper than a limesat hd.

JaneyPhung
10-23-2012, 05:41 PM
Thanks! IS it difficult to do the set up and can I still use the service of NFPS still?

Anubis
10-23-2012, 05:52 PM
Thanks! IS it difficult to do the set up and can I still use the service of NFPS still?
Each box has it's own method of set up and doing some reading on the different boxes may help you choose one.
The Jynxbox is a new HD unit which is also wifi capable but the module for the wifi option is not out yet and it is simple to set up.
As for your NFPS service question, yes you can still use it.

JaneyPhung
10-23-2012, 06:17 PM
Each box has it's own method of set up and doing some reading on the different boxes may help you choose one.
The Jynxbox is a new HD unit which is also wifi capable but the module for the wifi option is not out yet and it is simple to set up.
As for your NFPS service question, yes you can still use it.

Thank you Anubis, Can I buy the model i-Link IS-9600 HD FTA Satellite Receiver and use Vonets WiFi Bridge with service NFPS?

whoknows
10-23-2012, 06:28 PM
Yes you can use nfps and I use powerline adapters so you can be in any room in the house.

pugsycan
10-23-2012, 07:42 PM
nextfta is not HD and as far as I know isnt Wifi
you can buy a nextfta which is hd with wifi,it is cheaper than a limesat hd.

JaneyPhung
10-23-2012, 11:59 PM
Yes you can use nfps and I use powerline adapters so you can be in any room in the house.
Hi,
I ordered i-Link IS-9600 HD FTA Satellite Receiver and may I ask if you know where I can get the info in satfix to set it up please? Thanks

whoknows
10-24-2012, 12:14 AM
Here yu go>>>http://phoenix.satfix.net/showthread.php?120934-Set-up-guide-for-9500-9600HD

JaneyPhung
11-13-2012, 05:36 AM
HI all,

+++++++++++++++++
Set-up guide for 9500/9600HD

1. First you must download and unzip (extract) the XXXXX.pgm(.zip /.rar ) from the Files section.
...
+++++++++++++++++

Could anyone show me where to download the file please? Thank you

ICEMAN
11-13-2012, 11:50 AM
HI all,

+++++++++++++++++
Set-up guide for 9500/9600HD

1. First you must download and unzip (extract) the XXXXX.pgm(.zip /.rar ) from the Files section.
...
+++++++++++++++++

Could anyone show me where to download the file please? Thank you


go to the following link there you will find your file good luck

http://phoenix.satfix.net/forumdisplay.php?1010-I-Link-Receiver-Files

JaneyPhung
11-13-2012, 03:52 PM
Thank you for replying so quickly. Please confirm if the file is IR2x0_2.84.zip ? I am kinda newbie to this. Thank you so much

ICEMAN
11-13-2012, 04:18 PM
no that is not the file you want to load for your ilink 9600HD!!!

:stop:Try Again!!!!!!:grr:

Anubis
11-13-2012, 05:12 PM
Thank you for replying so quickly. Please confirm if the file is IR2x0_2.84.zip ? I am kinda newbie to this. Thank you so much
This is what you need....http://phoenix.satfix.net/showthread.php?119039-2K120820_IS9600HD_0016_P-zip-8-21-12

JaneyPhung
11-18-2012, 12:45 AM
This is what you need....http://phoenix.satfix.net/showthread.php?119039-2K120820_IS9600HD_0016_P-zip-8-21-12

Thank you,
I have loaded that file and put the Time Setting. When I go to Antenna set up, it does not show the Echo Star for 119 and 110. Did I miss something? In the instruction mentioned that I have to put 119 on port 1 and 110 on port 2. I have looked all over but I can't find how to do that.. Please help. Thank you

JaneyPhung
11-18-2012, 01:06 AM
I have loaded the version 19 instead and reload the version 16, is it still OK? I dont have HD service and I use the HD box, does it still work?
I go to Antenna setup and try to look for the Satellite Echo star 7 for 119W but I can't find it :cry: GOsh, I am so lost, please help!

JaneyPhung
11-18-2012, 02:09 AM
HI , Finally I got it working. THank you all for helping me.
Because the instruction about to Save the Factory setting save once the software is upgraded was missing after the software is loaded from this website

http://phoenix.satfix.net/showthread.php?120934-Set-up-guide-for-9500-9600HD



PLease help me for the last question. I have the key for private server but after setting the setup for private server. I use the blue button to apply the change and it appeared:

Server2 (Disconnected) NEWCAMD.

How can I change the status to to "connected" please?

gwrowe
11-19-2012, 06:15 AM
1 thing you guy's forgot to tell him about the I-Link 9600, is the 8psk module he will need for HD.

JaneyPhung
11-20-2012, 03:29 PM
1 thing you guy's forgot to tell him about the I-Link 9600, is the 8psk module he will need for HD.

Hi,

May I ask what is 8psk please? I bought a HD box but I dont have the set up for HD on the dish yet, is it still OK? Thanks

junior1
11-20-2012, 03:44 PM
It is a module that needs to be installed inside of the box for you to be able to receive HD channels. Try Googling the item and you should be able to find out more about it. Just from a little reading this morning I can tell that you have a lot to learn about your receiver. It would be in your best interest if you did as much as possible to read up about your receiver and what makes it work.

JaneyPhung
11-24-2012, 04:21 AM
Thank you very much Buddy, SOmeone used to help me to do the set up for a Satzen 500 but it lost the sound since a year so I finally bought this receiver. I also buy the NFPS service but something I found strange is eventhough I filled in all the informations needed, it still mention "disconnected". Does it mean that I didn't do the right set up to connect to the private server?

whoknows
11-24-2012, 12:56 PM
Try changing ip/url. If you have nfps in url change to ip or visa versa.
Donation has all numbers no letters. Example 0 is correct,,, oh is not.
Donation numbers are the same for user and password
Also try using port 10410.
If still no go then unplug router and receiver. Plug in router and wait for it to come all the way up. Then do the same with receiver. Let us know

JaneyPhung
11-25-2012, 04:42 AM
HI,
I have entered the domain with 1.nfps.ws and it works for about 1 hours, it changed to "Connected" then scrambled again and the server I have filled in is back to "disconnected". I don't know what I did wrong now seriously..... Please help

whoknows
11-25-2012, 02:17 PM
Is it back up now?


9:30 sunday

JaneyPhung
11-27-2012, 01:02 AM
Try changing ip/url. If you have nfps in url change to ip or visa versa.
Donation has all numbers no letters. Example 0 is correct,,, oh is not.
Donation numbers are the same for user and password
Also try using port 10410.
If still no go then unplug router and receiver. Plug in router and wait for it to come all the way up. Then do the same with receiver. Let us know
HI, thank you for helping me.

I have unpluged the receiver at least twice a day and replug the internet cable in different order because it was scrambled. Is it normal like that? Like last night I was watching a movie on channel 299 and suddenly I lost signal and can't not get it back until now. Is it because of my setting or just because there is a problem with the channel. Sorry for asking so many questions. I just try to understand how it works... Thanks

gwrowe
11-28-2012, 05:32 PM
If your stb is working, then your setup has to be correct, as far as the scrambling is concerned, it could be a couple of things, your ISP, could be doing something or the server could be having problems, and is being worked on. As for the loss of signal, if your dish is tuned in to sat's properly, then it could be due to bad weather (cloudy black skies etc.) or if it is really windy the dish could be shaking.

JaneyPhung
11-30-2012, 03:22 AM
Hi Gwrowe,
I still have the same problem. Last time I went in and refill all Network 2 to make it connect but now, I keeps scrambling no matter how many times I have turned the FTA on and off. I am so discouraged, really don't know what is wrong... IS there a place to see and reset the IP address?