ilink 9600 need DP44 ?

[wilkinsb01]

Hi i am having some problem with my ilink 9600
1)i need a 1000.2,10004 or any HD antena to get all Hd channel ?
2)do i need a DP44 switch with Power insertion to get signal ?
3)i have signal from 110 and 119 with out the 8PSK board after i intall not signal
4)best sat for HD 129 or 72
for now i am using two LNBF with regular antena dish 500 but i will upgrade to HD to get 129

Thanks in advance for any help

[whoknows]

1)You don't need 1000.2 or 10004 but you do need an l nb aimed at 129 or 72. Check with dishpointer.com as to which would be easier to hit from your location. Any dish will work but if you have a dish 500 then rather than add another dish for 129 buying the 1000 with the extra lnb would be the easiest. .
2)I would try a disq switch to see if you need extra power for the added l nb.
3) Try a hard boot after you install the board
4)Check channel lineup
HOpe this helps and if you have any other questions. shoot

[wilkinsb01]

thanks for the info i am using a diseqc i will post tomorrow with the turbo HD antena if is not get signal do you think will be my 8PSK board dead ?
because i have signal with out the 8PSK board