PDA

View Full Version : JYNXBOX ultra HD with c-band <moved>


jazmine
11-04-2012, 03:46 PM
Has anyone tested to see if the jynix hd ultra will work with for true fta? I am especially interested in the cband side. I remember reading the adervertisement when the receiver was first released that it was capable of working on any type of signal.
Anubis
11-04-2012, 04:53 PM
It has blind scan option so I don't see why not other than the motor settings don't work properly which they need to address.
I may be wrong here but maybe someone like Costactc could chime in here.
Costactc
11-04-2012, 08:29 PM
Most of these receivers are not very functional when it comes to true fta but should work. Motor settings for c band would not be an issue because you would need an outside source for moving your dish like a stand alone positioner with an actuator. You do realise that a dish of the bare minimum of 6' will be required but I would suggest 10' for all those tough s2/8psk channels on c band.
I would suggest a skybox f3 receiver for true fta and its price is quite minimal:


http://www.scobuy.com/original-skybox-f3-1080pi-full-hd-digital-satellite-receiver-high-definition-dvbs-receiver-p-11901.html
jazmine
11-05-2012, 02:05 PM
Most of these receivers are not very functional when it comes to true fta but should work. Motor settings for c band would not be an issue because you would need an outside source for moving your dish like a stand alone positioner with an actuator. You do realise that a dish of the bare minimum of 6' will be required but I would suggest 10' for all those tough s2/8psk channels on c band.
I would suggest a skybox f3 receiver for true fta and its price is quite minimal:


http://www.scobuy.com/original-skybox-f3-1080pi-full-hd-digital-satellite-receiver-high-definition-dvbs-receiver-p-11901.html

I do have the openbox s9 which works great on true fta. I do have a 8foot bud with cband 5150 lnb, and vbox diqec motor. I tried scanning in a couple of the more popular cband birds with the jynx all I get is skip. I do turn the motor off during the scan is in process. This is just testing to me I like to learn what each fta receivers are capable of. Thank you guys