Problem with network aplication with nano premium se

[madbomber]

Hi Everyone

I just received a Nano Premium SE as a gift a couple of weeks ago. My friend said that it was all set up and ready to go so I lined up my dish on 119 and sure enough it worked fine. The system went down a couple of times but I reinstalled the Private data and it came up again until a couple of days ago. This time I'm not able to put in the private data! This is what I have on my 'NET APPLICATION MENU'

TYPE: DREAM
SERVER: NO. 1
SOFTCAM: NEWCAM
AU: ON

and when I push "Authorization" that's when my problems begin!
This is what I have in my 'DREAMNET AUTHORIZATION " menu

INPUT TYPE: DOMAIN
SERVER: default -- (should read 1.nfds.ws but unable to change! ie no keyboard dialog box when I push OK on
my remote)
PORT:default--(should read a 5 digit no and can input it with No. key pad on remote)
ID:XXXXXXXXXXXXXX (this part is ok)
PASSWORD:XXXXXXXXXXXXXX (this part is ok)
DES KEY:default------(UNABLE TO CHANGE!!! NO KEYBOARD DIALOG BOX when I push "OK" no remote)

So what could be my problem? Has my subscription on the private data expired? Or is there something else wrong?
How can I test my private data to see if it is still active?

[torpainter]

hitting authorization takes you to id, password and des key
when you are in the menu where authorization is at the bottom are you highlighting domain then pushing ok?

[ICEMAN]

Hi Everyone

I just received a Nano Premium SE as a gift a couple of weeks ago. My friend said that it was all set up and ready to go so I lined up my dish on 119 and sure enough it worked fine. The system went down a couple of times but I reinstalled the Private data and it came up again until a couple of days ago. This time I'm not able to put in the private data! This is what I have on my 'NET APPLICATION MENU'

TYPE: DREAM
SERVER: NO. 1
SOFTCAM: NEWCAM
AU: ON

and when I push "Authorization" that's when my problems begin!
This is what I have in my 'DREAMNET AUTHORIZATION " menu

INPUT TYPE: DOMAIN
SERVER: default -- (should read 1.nfds.ws but unable to change! ie no keyboard dialog box when I push OK on
my remote)
PORT:default--(should read a 5 digit no and can input it with No. key pad on remote)
ID:XXXXXXXXXXXXXX (this part is ok)
PASSWORD:XXXXXXXXXXXXXX (this part is ok)
DES KEY:default------(UNABLE TO CHANGE!!! NO KEYBOARD DIALOG BOX when I push "OK" no remote)

So what could be my problem? Has my subscription on the private data expired? Or is there something else wrong?
How can I test my private data to see if it is still active?


ok let me ask you something..when you put your id and password..for example 12345678901234_ _ _ _ _ _ Did you deleted what I higlighted in red?cause if you did that might be part of your problem.dont delete them. I also noticed your domain name it should be 1.nfps.ws.not 1.nfds.ws:noidea: try to do those changes see if that helps...good luck

[hutch]

are you in dream or nanostream? you should be in dream

[madbomber]

I am in Dream

[torpainter]

I am in Dream

can you answer my question?

[madbomber]

OK I am aware of the type error 1.nfps.ws but it does not matter at this stage since I can not type that in once I get to the SERVER box in the "Dreanet Authorization" menu. Like I said before pushing OK at this stage does not yield a Keypad Dialogue Box.

[torpainter]

OK I am aware of the type error 1.nfps.ws but it does not matter at this stage since I can not type that in once I get to the SERVER box in the "Dreanet Authorization" menu. Like I said before pushing OK at this stage does not yield a Keypad Dialogue Box.

Thats not what i asked. I asked if you were highlighting domain then hitting ok

[madbomber]

No I scroll down to Authorization, push OK then put in PW 0000 which then puts me in the Dreamnet Authorization menu. This menu has:
Input Type:
Server:
port:
ID
Password
Des Key

When I scroll down to any of these fields and then push OK on my remote I get a Keypad Dialogue Box for "ID" and "Password" only. For the other fields: Server, Port,and Des Key , the Keypad dialogue box does not POP UP after pushing OK on my remote

[torpainter]

No I scroll down to Authorization, push OK then put in PW 0000 which then puts me in the Dreamnet Authorization menu. This menu has:
Input Type:
Server:
port:
ID
Password
Des Key

When I scroll down to any of these fields and then push OK on my remote I get a Keypad Dialogue Box for "ID" and "Password" only. For the other fields: Server, Port,and Des Key , the Keypad dialogue box does not POP UP after pushing OK on my remote
my premium menu is a little different
when you click on server are there two options? one domain ,one ip? are you able to switch between domain and ip?

[madbomber]

my premium menu is a little different
when you click on server are there two options? one domain ,one ip? are you able to switch between domain and ip?


OK I solved the problem! I simply switched to server 2 instead of server 1 on my NET APPLICATION menu! I guess when a server goes down everything goes to default.:seeya: