which file actually works

[jkrio]

i'm using file 208 but can't get any channels to work, all saying "scrambled Channel", all info is correct, however when i type in server info it won't save it, any help is greatly appreciated.

[james-fta]

I'm having the same trouble can't manage save settings first time happened

[jkrio]

hopefully there's someone out there that could help us out. i own other boxes and never had this problem, i've been involved with fta for the past 10 years and it's frustrating not knowing what to do. is it the box? is it the info i got from the server? is 208 the right file? i've followed every step on the setup but still no tv.

[Anubis]

Check to see if your P$ is down.

[KIDWCKED]

There is information posted with this file....

Please do factory reset after upgrade.
This file is for the NEWER Dreamlink with the HDMI port ONLY.
It is not for REGULAR non HDMI SD units

[jkrio]

did a factory reset and yes it is a newer sd with the hdmi port

[dishuser]

hopefully there's someone out there that could help us out. i own other boxes and never had this problem, i've been involved with fta for the past 10 years and it's frustrating not knowing what to do. is it the box? is it the info i got from the server? is 208 the right file? i've followed every step on the setup but still no tv.so you started with the blackbird?
too bad...lol

[jkrio]

unbelievable isn't it? that's why i love this, i love the challenge, reminds me of my first fta, it took me a week to watch tv lol

[KIDWCKED]

unbelievable isn't it? that's why i love this, i love the challenge, reminds me of my first fta, it took me a week to watch tv lol

Can you explain won't save it..The info entered is not viewable...Only the ip or domain will show in the list of 5 you have...As mentioned could be server related..

[jkrio]

yes sorry the info is not viewable but when i go back to network config, there is no info on server setup, but i'm guessing it's all saved is this correct? and if it is saved and i'm connected and connection is ok, everything should be working, isn't this also correct? could it be a server problem? but if it was, i shouldn't be able to connect. sorry for the trouble, but i'm stuck

[KIDWCKED]

yes sorry the info is not viewable but when i go back to network config, there is no info on server setup, but i'm guessing it's all saved is this correct? and if it is saved and i'm connected and connection is ok, everything should be working, isn't this also correct? could it be a server problem? but if it was, i shouldn't be able to connect. sorry for the trouble, but i'm stuck

Yes..
Yes..
Quite definately as server issue perhaps..

[gilbuilt]

Go to Network Settings and hit the Blue button on remote to set up your servers. A box will appear select password 0000.

You have 5 private server you can put in.

To place your servers in take time and make sure all your ps settings are right.Here how to do...

Name or ip..after done push exit

Ports...when done push arrow down on remote directional pad

Id ...after your done press exit

Password...after done press exit

Des Key..after done press exit

Connect....press ok and see if it connects, if it says not connected hit it again and see if it does. If not you havnt put in the ps setting right.

Press exit ...you will be back to server setup...make sure you see your ps is on not off.

Press exit again you will be back to Network Settings leave it sit three you will see a box pop up and it will tell you which servers are connected.Will say Network is Connected (4)(3) if you have 2 activated. Exit out if connected.

[sta_minghia]

yes sorry the info is not viewable but when i go back to network config, there is no info on server setup, but i'm guessing it's all saved is this correct? and if it is saved and i'm connected and connection is ok, everything should be working, isn't this also correct? could it be a server problem? but if it was, i shouldn't be able to connect. sorry for the trouble, but i'm stuck

hi i had same probleme almost gave up left it connected for a couple days when i went to disconnect it was working since no problem
MAKE SURE THAT WHEN YOU GO TO NETWORK YOU SEE THE SERVER NAME NOT THE DUMMY hope it helps
to me if dreamling do not fix this they will loose a lot of business

[jkrio]

for those who need help with setting up dreamlink sd with hdmi port, after you have typed in the server info, press save and exit, you must setup your server on whichever number you opted, 1 to 5, once you highlight that number you must turn it on by pressing the right arrow button on the remote and that should do it. Mods, you may close this thread, thank you for all your support.

[alpine]

Thanks Jkrio.. work like a charm.

[bebe55]

HI Jkrio I do the same what you said. but still no tv is connect. i use file 208 any help



for those who need help with setting up dreamlink sd with hdmi port, after you have typed in the server info, press save and exit, you must setup your server on whichever number you opted, 1 to 5, once you highlight that number you must turn it on by pressing the right arrow button on the remote and that should do it. Mods, you may close this thread, thank you for all your support.

[KIDWCKED]

HI Jkrio I do the same what you said. but still no tv is connect. i use file 208 any help

do u see <connection ok> in server menu...??

[bebe55]

HI alpine how you do it to work . please can you explain .Thank YOU



Thanks Jkrio.. work like a charm.

[KIDWCKED]

HI alpine how you do it to work . please can you explain .Thank YOU

#14 (http://www.satfix.net/showthread.php?122528-which-file-actually-works&p=881785#post881785) .......////\\\\\\

[bebe55]

make sure you see the name of the server is on there.It 's working now THANK you every one It help alot