PDA

View Full Version : Bev and dish


Adamo
11-12-2012, 09:41 PM
How come every time I switch channels from bev to dish it takes to long to open the channels Thanks
Adamo
11-12-2012, 11:05 PM
Did anyone know anything like this
nrules387
11-14-2012, 04:48 AM
takes your reciver time to change witch server it is using.
Adamo
11-15-2012, 01:01 AM
What do you mean
yotrek
12-03-2012, 06:41 PM
What do you meandish has it's own server and bv also in different server, so each have its own server, when you watching dish and switching it to watching bv, it has a delay, that's is normal mate
greeny
10-03-2014, 02:40 PM
can you tell me how to set it up for BEV?
Glatt
10-03-2014, 03:08 PM
Do you have a dish pointed to 91 and 82?
greeny
10-04-2014, 01:28 PM
yes!
let me explain ..
here is the things:
Right now i am running dn (110and 119)on satzen 300.
it came to my mind that i want to test it out on 91 and 82(without changing the DN set up) bc i have a cable(91 and 82)running from dish pro.
What i did was to disconnect the Dn cable bc i can not use the external disq switch with dish pro and reconnected the Bev cable scanned
and got all the channels but they all scrambled .
i was told there is a different setting and i am asking please if you can help me the Bev configuration ?
MUCH APPRECIATED
greeny
10-04-2014, 01:37 PM
Do you have a dish pointed to 91 and 82?

yes!
let me explain ..
here is the things:
Right now i am running dn (NFPS)(110and 119)on satzen 300.
it came to my mind that i want to test it out on 91 and 82(without changing the DN set up) bc i have a cable(91 and 82)running from dish pro.
What i did was to disconnect the Dn cable bc i can not use the external disq switch with dish pro and reconnected the Bev cable scanned
and got all the channels but they all scrambled .
i was told there is a different setting and i am asking please if you can help me the Bev configuration ?
MUCH APPRECIATED
Terryl
10-04-2014, 01:46 PM
You can use 4 DP single LNB's with an external Diseqc switch, if all LNB's are the same type (DP, standard or legacy) then there should be no problems with an external switch.

The only problem would be the IKS server used, and I can't help you with that.

One way to avoid a delay would be to setup two receivers, one for dish and one for BEV with their own IKS servers, then just switch the video/HDMI inputs on the TV.
greeny
10-04-2014, 03:05 PM
You can use 4 DP single LNB's with an external Diseqc switch, if all LNB's are the same type (DP, standard or legacy) then there should be no problems with an external switch.

The only problem would be the IKS server used, and I can't help you with that.

One way to avoid a delay would be to setup two receivers, one for dish and one for BEV with their own IKS servers, then just switch the video/HDMI inputs on the TV.

i have ddp quad