PDA

View Full Version : Good 110w, Not signal 119w



beba65
11-16-2012, 01:46 PM
Greetings, I recently bought a ilink 210. Internet Download a manual for installation, in the same bin loader give me 2.84 which install and follow step by step what the manual said and I could scan channels 119w and 110w. When I go to save the data after I see the channels I have to go to the channel manager menu and give control channel view and then go out and the problem is that I can only see the channels of 110w, the 119w of me says no signal. Please someone tell me if I do well?: Satellite Search
Satelite......Echo 7 119w.............Echo 10/11 110w
DiseqC 1.0....Port A (119)......Port B (110)
DiseqC 1.1 None
TP Frequence 12224 (119) TP 12224 (110)
LNB 11250
Dish 1 (119w)
Dish 2 (110w)

Please a apprecciate any help. The TP have any difference please send me any internet or manual for this

whoknows
11-17-2012, 12:25 AM
When the receiver scans a satellite it will scan all the tp on 119.
The first tp on 119 may not show any quality. If you move to a higher tp then all will be good providing dish alignment and settings are correct.
If you want to check for quality on 119 change to 12297.
I think you did well...good luck

satrax6
11-21-2012, 11:15 PM
Try doing a blind scan so you will pick up all the tp including the newly added tp. Also specify which type of LNB you are using. Good luck!

steven charles
11-22-2012, 01:26 AM
Greetings, I recently bought a ilink 210. Internet Download a manual for installation, in the same bin loader give me 2.84 which install and follow step by step what the manual said and I could scan channels 119w and 110w. When I go to save the data after I see the channels I have to go to the channel manager menu and give control channel view and then go out and the problem is that I can only see the channels of 110w, the 119w of me says no signal. Please someone tell me if I do well?: Satellite Search
Satelite......Echo 7 119w.............Echo 10/11 110w
DiseqC 1.0....Port A (119)......Port B (110)
DiseqC 1.1 None
TP Frequence 12224 (119) TP 12224 (110)
LNB 11250
Dish 1 (119w)
Dish 2 (110w)

Please a apprecciate any help. The TP have any difference please send me any internet or manual for thiswhat dish and lnb are you using friend....