View Full Version : can't get arabic channels on 119
Larbi
11-24-2012, 07:32 AM
Hi guys,
I don't know if I'm doing wrong. I have limesat HD air with DPP 1000.2 DISH. when i scan 119 i get all channels except international ones. Like aljazeera sport for exemple. Is there any way to get those channels? Are they on 119?
Thanks for your help
dishuser
11-24-2012, 07:38 AM
Hi guys,
I don't know if I'm doing wrong. I have limesat HD air with DPP 1000.2 DISH. when i scan 119 i get all channels except international ones. Like aljazeera sport for exemple. Is there any way to get those channels? Are they on 119?
Thanks for your help
no they're on 118
Larbi
11-24-2012, 08:29 AM
Thank you for your help dishuser.
Do you lean 118.7 Anik F3?
Do u have the parameters for this bird?
Thanks
whoknows
11-24-2012, 01:23 PM
You need a low frequency lnb aimed at 119/118 and sometimes a slightly larger dish to receive that satellite.
Larbi
11-24-2012, 02:20 PM
I have dish network 1000.2 DPP. Would it be enough?
hagop
11-25-2012, 12:18 PM
It looks like your dish is big enough, but your lnbs are all toghether you can't get 118.7 from those lnbs.
Larbi
11-27-2012, 11:34 PM
I can get some 118.7 channels like CNN 200 for example. But can't get international channels only, others are working
Larbi
11-27-2012, 11:38 PM
What info should i put for 118.7?
LNB Power .............ON
LNB Type................OCS-DP
LNB Freq................?
22KHz.....................OFF
Tp Freq..................?
DiESqC 1.0..............Port 2
Motor......................OFF
Legacy SW..............None
Terryl
11-28-2012, 12:43 AM
Sorry you cant get 118.8 with a Dish 1000.2, you need a Dish 1000+, it has the two LNBs for 110 and 129, but has the special center LNB setup for 118 and 119, without that LNB all you can maybe get is the last 4 or 5 transponders on 118, then it will peter out.
You need that special LNB and the bigger dish for 118.
One way to do it is the use a second dish (about a 30" or larger) with the DP LNB for 118 on it, then run that output to the LNB input on the Dish 1000.2's LNB.
Larbi
11-28-2012, 11:58 PM
Thanks Terryl,
If i well understand the dish is size enough, however the issue is with the LNB. So if i add an additional LNB on same dish and connect it to LNB IN, can this work?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.