PDA

View Full Version : Issue With 2 Servers



kukkudo
11-27-2012, 01:26 AM
Hi Guys,

I am having an recent issue where one of my receivers stopped connecting. On NOI it connects one of my receivers but not the other. Its been working fine for the past few months the codes are working fine. I troubleshooted with bringing the other receiver down to see if it was an receiver issue but it still doesn't work. Now my settings have been fine since April 2011. This just started happening now. Any Help?

Thanks

ticktack
11-28-2012, 04:36 AM
you can ask in your receiver section and get better help.

gwrowe
11-28-2012, 05:55 PM
Recheck your advance settings for both receivers and make sure all info is correct, then check network settings in each receiver and make sure the gateways match. Also the IP's in the settings should be one # higher or lower than the other.

kukkudo
11-29-2012, 12:25 AM
Recheck your advance settings for both receivers and make sure all info is correct, then check network settings in each receiver and make sure the gateways match. Also the IP's in the settings should be one # higher or lower than the other.

It has been fixed. Thanks guys