just learning

[dplayer]

hey guys,i,m new to this and trying to learn. i just bought a nano se premium and have no idea how to set it up. can someone direct me to a forum that could explain

[ICEMAN]

16999try to read the following links real careful.it willl help you to set up your receiver receiver..
NOTE:this next link is for a nano premium but the set up is basically the same as nano premium SE..use the correct files for your receiver
http://phoenix.satfix.net/showthread.php?124348-Nano-premium-set-up-information (http://phoenix.satfix.net/showthread.php?124348-Nano-premium-set-up-information)

16999the following link is your factory file for nano premium SE
http://phoenix.satfix.net/forumdispl...-Factory-files (http://phoenix.satfix.net/forumdisplay.php?1405-Factory-files)

16999and this next one is your Bin file nano premium SE

http://phoenix.satfix.net/forumdispl...emium-SE-Files (http://phoenix.satfix.net/forumdisplay.php?1402-Nano-Premium-SE-Files)

16999and finally this last link use it to set up your p/$

http://phoenix.satfix.net/showthread...o-Premium-Menu (http://phoenix.satfix.net/showthread.php?120876-Settings-for-Private-Server-on-Nano-Premium-Menu)

16998hope this information helps you,have a nice day,,Salud16996

[dplayer]

thanks for your time chevy. i can't open the how to file, says i need administrative perrmission,can you help? thanks again

[ICEMAN]

fixed it try it now please..:thumbsup::thumbsup:

[newsman]

hi, chevy85
so after i do all these steps:

1) Copy Extracted Bins located here.One is the latest factory the other is the latest bin, copy both onto the USB Stick.First file below is Factory second file is bin file.
http://phoenix.satfix.net/showthread.php?119019-Official-Nanosat-Premium-Factory-Firmware-9-15

http://phoenix.satfix.net/showthread.php?119020-Official-Nanosat-Premium-release-SKY_1-12



2) Insert USB Stick into front USB Port.
3) Go to Menu, Utility, USB and chose BIN to load.
4) Load Factory NPP_9.15_Factory
5) Then load SKY_1.12
Mandatory: Please do a "Factory Default" after updated the SKY_1.12
6) Set up Satellites.
7) Scan sats.
8) Confirm CH 101 is up.

should i install the latest bin file, witch is (Official Nanosat Premium SE 3.18 )
or what is the next step?
thanks,








16999try to read the following links real careful.it willl help you to set up your receiver receiver..
NOTE:this next link is for a nano premium but the set up is basically the same as nano premium SE..use the correct files for your receiver
http://phoenix.satfix.net/showthread.php?124348-Nano-premium-set-up-information (http://phoenix.satfix.net/showthread.php?124348-Nano-premium-set-up-information)

16999the following link is your factory file for nano premium SE
http://phoenix.satfix.net/forumdispl...-Factory-files (http://phoenix.satfix.net/forumdisplay.php?1405-Factory-files)

16999and this next one is your Bin file nano premium SE

http://phoenix.satfix.net/forumdispl...emium-SE-Files (http://phoenix.satfix.net/forumdisplay.php?1402-Nano-Premium-SE-Files)

16999and finally this last link use it to set up your p/$

http://phoenix.satfix.net/showthread...o-Premium-Menu (http://phoenix.satfix.net/showthread.php?120876-Settings-for-Private-Server-on-Nano-Premium-Menu)

16998hope this information helps you,have a nice day,,Salud16996

[torpainter]

go to system info in menu and post whats there

[newsman]

sorry i should of explain my self better.
I'm planning to buy the nanosat se premium so I'm trying to get all the info that i need to setup the new box for nfps system
thanks,




go to system info in menu and post whats there

[torpainter]

sorry i should of explain my self better.
I'm planning to buy the nanosat se premium so I'm trying to get all the info that i need to setup the new box for nfps system
thanks,

once you get the rcvr look up what factory file is loaded.If factory file is the latest one just load the latest software 318

[newsman]

thanks torpainter, for the quick reply.
if the the box has the 7.09 factory file, how would i load the 3.18 file (with USB stick or the null cable) and in witch mode should i load the 3.18 file

thanks



once you get the rcvr look up what factory file is loaded.If factory file is the latest one just load the latest software 318

[torpainter]

thanks torpainter, for the quick reply.
if the the box has the 7.09 factory file, how would i load the 3.18 file (with USB stick or the null cable) and in witch mode should i load the 3.18 file

thanks
usb stick ,you can load either bootloader or software