how add satelites channels to my cws 700

[virgilio]

how i add the satelites channels to my cws 700, i gave a factory default to delete satelites channels for error, and now i dont see the satelites channels, thank you.

[steven charles]

how i add the satelites channels to my cws 700, i gave a factory default to delete satelites channels for error, and now i dont see the satelites channels, thank you.friend you have to go to each satellite your pointing to,for example 110-119 and put the settings for each sat and make sure the signal and quality is good like before,and then re-scan each sat,and enter your network aplication info,for the private server you have,good luck friend....

[virgilio]

hi when i put the setting for 110-119 i dont get signal and quality in my cws 700, but if i conected my cws 800 i have good signal and good quality, and enter the private server info in the cws 800 work perfect, using the same antena dish cable that i use for the cws 700, but my cws 700 only say now not channels. and not have signal and quality in 110-119, all set are fine in the cws 700.

[steven charles]

hi when i put the setting for 110-119 i dont get signal and quality in my cws 700, but if i conected my cws 800 i have good signal and good quality, and enter the private server info in the cws 800 work perfect, using the same antena dish cable that i use for the cws 700, but my cws 700 only say now not channels. and not have signal and quality in 110-119, all set are fine in the cws 700.try posting the settings for each sats and what dish and lnb your using,including ports,and does your box turn on at all,and have you tried re-loading the latest file for that receiver again also...

[virgilio]

hi i have a 6 ft channel master dish, i use circular dual lnb, 2 feed, i use multiswicth 4x4, my antena set up is
sat 119 sat 110
lnb 11250 lnb 11250
22khz off 22khz on
lnb type normal lnb type normal
diseq,lnb1 diseq, lnb2
i have other nano 2 working fine, and the cws800 working fine to,

[steven charles]

hi i have a 6 ft channel master dish, i use circular dual lnb, 2 feed, i use multiswicth 4x4, my antena set up is
sat 119 sat 110
lnb 11250 lnb 11250
22khz off 22khz on
lnb type normal lnb type normal
diseq,lnb1 diseq, lnb2
i have other nano 2 working fine, and the cws800 working fine to,turn off the 22khz on sat 110 and what lnb freq or tp are you using,for sat 110 use 12224 or 12282 and for sat 119 use 12297 to see if you get any signal,but try re-loading the latest file first....

[virgilio]

i yet loader file 2.55 fixed, and back to file dongle 2.52 i think that is the latest. i turn 110 off nothing happen, i turn back to on again, 110 is tp 12224 119 tp 12297. all this problem star when my neighbor change router when he was using the cws 700, but problem still happen here, but cws 800 work with the cws 700 info, and with same dish cable.

[virgilio]

i loader bin v2.59, and star scan some channel, box is working, but some channel from satelite 110 are missing, like # 307-309-342-844-7782 most of the 110 satelite.

[virgilio]

my cws 700 do not has signal in satelite 110 when i scan boxe, all setting are fine in antena setup, when i conected the cws 800 work fine in same cable dish, both 110 and 119 are working, but cws 700 only give signal in satelite 119.

[steven charles]

my cws 700 do not has signal in satelite 110 when i scan boxe, all setting are fine in antena setup, when i conected the cws 800 work fine in same cable dish, both 110 and 119 are working, but cws 700 only give signal in satelite 119.the problem has to be on your settings,and try using a different tp on sat 110,like 12282 and port 2 to see if that gives you the signal....

[virgilio]

i am using diferent port and diferent tp.i note that when i scan satelite 110, it show me 119 donw below rigth

[steven charles]

i am using diferent port and diferent tp.i note that when i scan satelite 110, it show me 119 donw below rigthwell friend have you tried doing a factory default and re-load the latest file for the receiver,re-enter the settings for each sat,and re-scan the sats,is there a way you can post a picture of the settings for sat 110,that way we can see what settings you got and see where the problem is,good luck friend....

[virgilio]

now 119 sat. gone too, but when i conected cws 800 both sats. work, i loaded in cws 700 factory bin 1.03 and the latest file i know is v2.59, if you know other files let me know please, cws 700 dongle, thank you steven. beffor was in file v2.52, thank you.