kbox hub

[coolman68]

I have a kbox and hub and it well not start up in network setting at the top it says version 00.05 the DHCP IP says 192.168.0.103 and says connection ok go to server satup put in ip address number ok put in port ok ID OK PASSWORD ok and key ok pressok and it says server is connected and save and exit turn off at back and back on no pic Ihave file 104.100.2011030 can you help

[mogdog10]

What version is your hub?

[coolman68]

version 4 hub

[coolman68]

do I have the right file 104.100.2011030 in it if not till me the file

[poppy]

if your hub is a clone that is the right file and if you put all the codes in right it should work.

[coolman68]

I put the right codes in it till no pic network setting sell version 00.05 and i have ip number can i use a different file I run a cnx and run good

[poppy]

To me it sounds like you didn't put them in correct.

[coolman68]

in my system information it say model k1pro loader version L1.00.00 hardware version HMV03 1.00.00 APPLCATION Version ps 1.04-20110303-0005 build date may 03 2011 is that all right

[KIDWCKED]

Try doing everything in this link...From the begining..
khub ver4 set-up (http://phoenix.satfix.net/showthread.php?119100-khub-ver4-set-up)

[coolman68]

do I have the right version in system informtion if so I will try agan to reload thank you

[viper]

Kbox Plus And Prodigy Secret Bios

c/p by neutron

Turn Off Kbox From Back Switch.

Now Press Channel + On Kbox Plus While Turning On Power From Back Switch.

Leave Channel + Button Pressed.

Now It Will Show Some Weird Display 01a6.

You Need To Have Kbox Hooked To Tv To See Screen.

You Will See First Option.

1- System Test

If You Press Ok On Remote You Can Check Flash Here.

2- Live Test

3- Video Test

4- Audio Test

5- RF Modulator Test

6- Front Panel Test

7- USB Test

8- Default Settings

With This Option If You Have Any Problems It Will Default All Settings To Factory.

On The Prodigy Is The Same Steps Only You Press Volume + Instead Of Channel + (It Might Work With Channel Plus Not Sure).

To Exit Bios Just Turn Off From Back Switch And On Again

[coolman68]

I did the system test and the testing flash said ok testing RS232 FAIL THANKS HOW can I test hub

[viper]

mine didnt pass rs232 test so i think thats why it cant read through the hub. just my thought thats why im not using mine cant get it going

[the driver]

need info on kbox work fine till 3 weeks a go