Jynxbox ultra HD W/JB200 8PSK Board

[Gilles1945]

Hi,
I'm new to JynxBox and looking forward to buy one since a week now scanning around to have info about that JynxBox
now I'm more confuse than went I started the searching. Would somebody tell me what's needed to work with Dish 500 a get HD channels

[whoknows]

If you want HD channels then you first have to sign on with a P$ that has HD up and running. If you have a dish 500 then you are limited to two satellites which would either be 110 and 119 american sats or 91 and 82 canadian. If it were me I would do the poor man's addon and add an lnb to the 500 to get 110 119 and 129. Or you could get another dish and just align to 129.
There is also the eastern arc(61.5, 72 and 77) for HD, but then again check with your p$ to see if they are available. Good luck

[Gilles1945]

Thank whoknows,

What about HD board and tuner Board do we buy that separately and what are they talking about???

Do I need those??

[nrules387]

You will need a tuner, the jb200 will pick up DN and BEV hd channels and SD channels., Some people who sell install them before they send it, and some send it with the tuner not attached, some also sell without it

So make sure when you buy it includes the tuner.

[satellite_guy]

It's a great box, easy to set up and very reasonably priced compared to many other HD boxes. Only 2 fault I found with it which are not major. 1 scanning of birds is very slow, and 2 video card not bad but not great IMHO.