JX_na_firmware_v236_dual beta feedback

[Anubis]

This is a beta file and Jynx team requires additional feedback.
Please state if you are using V1 or V2, type of LNB & switch, and your setup and be as specific as possible with your feedback.

[ltorresr]

JX V2. I used two LNB DP with DP34 switch. I have freeze issue with 214, 216, 217, 231, 233 & 236. I used two different private server and two different internet connection. The freeze are constantly. I use other fta box (Satzen) without any issue with same LNB, switch, PS and internet connection. Any suggestions.

[Mr Hanky]

Give me a break is this the read me.lmao.

[iq180]

jynx box V1, dish 500 with DPP twin LNB & a dish 300 with a single dp LNB on the sat in port of the DPP LNB, no switch, sat 119.0w
set to port 1, sat 110.0w set to port 2, sat 129.0w set to port 3,
9 day EPG now works great, sat scan is now faster with no missing CHs, no need to add TPs.
great work jynx team, now if you will add a AM PM time setting i would be more than happy.
THANKS

[daryld]

I'm using a DPP44 switch with a couple of DP Plus dual LNB's to three different stb's. The scan is good, excluding only a few tp's like before. Still only about a three hours of epg. Am I missing something on the 9 day epg download?

[LuisEduardoP]

With this file is fixed EPG for SKY MX?

[bobby]

With this file is fixed EPG for SKY MX?

this is a feedback thread and to answer your question, yes sky mex 58, dn mexico 77.2 and claro tv all have epg now...

[Anubis]

Give me a break is this the read me.lmao.

Read me has me added here...http://phoenix.satfix.net/showthread.php?125030-JX_na_firmware_v236_dual&p=895852#post895852

[amo77]

Well, so far I can't tell any difference. The PVR/recording playback is still f***ed up, Scanning is still the same as far as I can see, although I never had any scanning issues. Perhaps a few channel names have been corrected, but not all. The channel numbers after loading this bin file all read 0000. Back up copy of channels loaded into the machine results in all channel numbers reading 0001. Rescanned and all channel numbes are back to normal, but now have to go the very lengthly process of deleting all duplicate channels. The bin file states that it has the capability of editing the channel numbers....I'll be damned if I can find that option anywhere in the menu. So far I cannot see a reason to load ths file. The only reason I loaded it was to have the channel number editing option because I would like to change the channel numbers of a bunch of channels, but it appears that option realy is not available. They seem to be putting out new bins to give the impression of good support to sell more boxes but it's all a sham. Sounds like they borrowed the playbook from I-Link and Dreamlink when they first came out.
This box is going to be a real pain in the butt, Can't they just focus on one thing at a time !!!!!

[Rizz]

Hi FTA Team, so far 2.36/2.37 running smooth but I have a EPG question if any one is able to get EPG on BEV ? DN is fine I can get full 9 days but nothing on BEV I did reboot left on BEV EPG channel for few hours but not even one info all blank.

Thanks

[tinufta]

Hi
I only get spotty Epg. What channel do you use and is the usb at the back or the front.

[Rizz]

yeah i have usb at back with 1 GB free space I have no problem getting DN EPG but nothing from BEV before with older bins everything work fine not problem any any epg .
Hi
I only get spotty Epg. What channel do you use and is the usb at the back or the front.

[budyyy]

Also have spotty epg.. or should i say HAD. My box died, maybe the defect that killed it was the same that screws up epg's? Will let you know if my new receiver has the same epg issues or not, assuming leesat sends me a replacement.