Help adjusting my satellite with Jynxbox Ultra HD

[755donohoe]

So this weekend I will be adjusting my satellite, son will be watching Jyxbox Screen and me on roof! I might only be able to receive 1 satellite but until I change dish it will maybe fine. This is my setup: I have a Jynxbox Ultra HD receiver with both ATSC & DVBS2 Tuners and on the roof, a Dish Network HD 25"X20" Satellite with Avenger 321 0.1dB Standard Single Ku Band LNBF, when I canceled service with Dish Network I only had to return their LNBF so installed the Avenger. No dish motor, my Elevation &
Azimuth is clocked in roughly already, ATSC channels work great.

I just need some help configuring Jynxbox menu screen (Dish Setting) Satellite, LNF, Freq, Transponder, DISEqC1.0, DISEqC1.1, Legacy SW, Legacy LNB, 22K AND also next screen that comes up and any thing that might help! Below is the satellite I want!

[Terryl]

You cant receive Nimiq 1,2 4, or 6 (none of the Canadian satellites for BEV) at your location.

And I edited your long and lat a bit to keep your exact location secure.