Boot loop Problem

[755donohoe]

Boot loop Problem
So I did all of this "To fix this problem, you need the HD Loader, a straight through serial cable and the factory file v8 Firmware.” Now I see (noCH) ON Jynxbox Ultra HD RECIEVER, I am not able to get back to on screen menu, USB stick is not recognized, how do I reinstall (JX_NA_Firmware_v237_dual) this what I had before I did this fix? What should I do?
No other buttons on remote work only power and it only just reboots back to noCH, still able to control other devices AUX, TV! To TV I use HDMI cable

[Anubis]

How did you manage to get a boot loop to begin with?
Factory default then...
Use the loader if you cannot load file via usb on front port.
Did you follow the directions posted here? http://phoenix.satfix.net/showthread.php?124736-How-To-Fix-Bootloop-Problem

[iq180]

Boot loop Problem
So I did all of this "To fix this problem, you need the HD Loader, a straight through serial cable and the factory file v8 Firmware.” Now I see (noCH) ON Jynxbox Ultra HD RECIEVER, I am not able to get back to on screen menu, USB stick is not recognized, how do I reinstall (JX_NA_Firmware_v237_dual) this what I had before I did this fix? What should I do?
No other buttons on remote work only power and it only just reboots back to noCH, still able to control other devices AUX, TV! To TV I use HDMI cable
you cant use the hdmi cable because you have the wrong format, use the rca cables that came with your jynx, you want get a
clear pic but you can see the menu to change the format, remember to change your tv settings to av cables, then use the front usb
to load the files, if you see NOch on the vfd you have fixed the boot loop problem, now fix the format and watch tv.

[755donohoe]

Your the best fixed!
Thank You

[info2013]

I also have a problem with the Looping problem using RCA cable first time setup.

First I used the HDMI cable, installed the 237 with USB, then it reboots smothly. After the setup screen re-emerge, I Pushed "OK" in the scrren change menu, then it went to a black screen. Attach a RCA cable then I get the loop back screen, still blank on HDMI after boot. How do I do a reset or can someone help on the sequence to change the resolution back to 720P or 1080I.

thank you.

[iq180]

I also have a problem with the Looping problem using RCA cable first time setup.

First I used the HDMI cable, installed the 237 with USB, then it reboots smothly. After the setup screen re-emerge, I Pushed "OK" in the scrren change menu, then it went to a black screen. Attach a RCA cable then I get the loop back screen, still blank on HDMI after boot. How do I do a reset or can someone help on the sequence to change the resolution back to 720P or 1080I.

thank you.
did you change the settings on your tv to (AV) (VIDEO) for the rca cables to work, this is input on your tv, if not it want work,
the rca cables will work, you want get a clear pic but you can see the menu to change it from PAL to NTSC, then you can go back
to the HDMI cable.

[info2013]

I got it to work by putting a computer monitor on and ran it at 1080P. No problem. Change it back to 720P, working now on TV. The RCA settings did not work for me on the stereo receiver or the TV AV I/O. Probably Faulty RCA video connector.