STUCK at C.108 after BOOTING on?

[mram53]

Hello,

I loaded 8.10 ldr and then 1.29 NPN file to fix connection problem on nano2.

It loaded well with "GOOD" after loading but now it is stuck at C.108 when I turn it on. Remote is not working too.

What do I do to fix this please.

Thx.

[dishuser]

use recovery loader

[gwrowe]

I even tried that, with a nano 2 I have here, and it didn't work.

[mram53]

Maybe I should use a SLEDGE HAMMER???????????

[ICEMAN]

You might want to give a shot and try this next procedure step by step and hope it works for ya..good luck
http://phoenix.satfix.net/showthread.php?121498-Recovery-file-CNX-Nano-2-Recovery-8-10

[dishuser]

heard it worx better with older files

[gwrowe]

Tried it with the 8.10 file 3 times still didn't work, although I hadn't tried an older file, which one would you suggest!

[ICEMAN]

Tried it with the 8.10 file 3 times still didn't work, although I hadn't tried an older file, which one would you suggest!

you might wanna try this older file try it a few times it might work for you


http://phoenix.satfix.net/showthread.php?123886-Older-Recovery-Files-plus-Utility

[dishuser]

I think it was 8.06

[dave s]

i had to fix mine a couple years ago. i believe 8.05 worked better,but you could try both. hope you fix your problem

[gwrowe]

OK! will try these let you know!

[gwrowe]

Used recover loader and 8.05 ldr. file, now what do I do? have a different screen and display showing 0, gave me a list from 1 - 0?

[gwrowe]

It is up and running, used recovery loader and file 8.05, then loaded 8.10 npn. file and then the 1.29 file, converted it to I-Link, now it is running Thanks Guy's!