Losing signal for some time when changing HD channel

[causap63]

For exemple, sat 82 , signal = 97%
When I change channel, the signal goes red for some time, then
comes back in the blue and the picture arrives.
But the signal can stay in the red zone for 1 minute or more...very annoying.
That problem is only with HD.

Could it be a defective module in the DL box ?

[steven charles]

it sounds like your loosing power some place,try posting what dish and lnbs your using and the settings for each sat your pointing too,and switches if your using any,good luck friend....

[causap63]

I have 4 different dish 82,91,110,119 with a disqc switch cheetah
The problem occurs only with HD

[steven charles]

I have 4 different dish 82,91,110,119 with a disqc switch cheetah
The problem occurs only with HDi seen a few dreamlinks modules that came defected,maybe yours its another one,but rule out the switch and rg6 cable or connections that the problem ain,t there,but it you still have the guarantee on the module might as well send it in and get a new module,good luck friend....

[kingbolt]

I am having the same problem too it goes out only on HD

[d1964]

Do you have the Turbo 8psk turned on in menu, manual scan tab, also is it switching servers, if so try a quick channel down then up with remote or go into menu,Dish settings and wait for both s and q levels to reach there max then exit ,you should get a picture. Good Luck and Happy New Year....

[causap63]

update:

I changed Diseqc switch
I changed SK200 board

Same problem when I go from a satellite to another.
I loose the signal for 1 or 2 minutes and then it comes back....

(all may dish are at 90-95% signal)

[Kingdom]

Send a pm to mod Terryl (http://phoenix.satfix.net/member.php?114-Terryl) about this issue. He might help you. The issue looks like your box is bad.