Cant seem to get Any Hd Channels on 9000hd

[buck969]

Any way to test my hd module on 119,91, or 110. Everything is working great, except I cant get any quality on 81 or 129 when i scan in. I have 802 software and i think updated tps on 82 and 129. Any ideas. I can run same cable to my limesat and I get Hd on 82 and 129. I do get Quality on 82 on tps 12428 and 12443 and i scan in 15 indian channels. I know its something simple. Any ideas why no Hd tps giving me signals.

[torpainter]

9421 on 110 is an open HD channel

[buck969]

Thanks for the response. No 9421. If my Hd module is bad will it not let you scan in hd channels. Is there a tp list for all sats that i could double check against mine.

[torpainter]

Thanks for the response. No 9421. If my Hd module is bad will it not let you scan in hd channels. Is there a tp list for all sats that i could double check against mine.

If your hd module is bad you wont scan them in
lyngsat has all sat info

[dishuser]

is it turned on in menu?

[buck969]

I figured it out bad HD module

[Northman]

I'm having the same/similar issues.

If I scan 129W (ciel 2) I get about 20 channels but no HD and most TP's have no quality even tried blind scan with no luck.

On 388 PIXL my vs9000hd says its a HD channel but I'm at 480i how can I change this to 720P I have it set to 720P in menu and EXT tuner is set to on(default).

I replaced old 8psk Module with new SK 900 rev 0.3 still no luck.

Any help would be appreciated.

[Northman]

Once you install the 8psk Module is there anything you need to do to enable it? Or just plug it in and run the loop-out to it?

Thanks.

[bobby]

Once you install the 8psk Module is there anything you need to do to enable it? Or just plug it in and run the loop-out to it?

Thanks.
you really should start your own thread and not hi-jack another members it's against site rules plus you will get more help that way, now, you could try toggling the tuner on/off/on, one of the menu options will have this feature...

[Angel Eyes]

Once you install the 8psk Module is there anything you need to do to enable it? Or just plug it in and run the loop-out to it?

Thanks.

go to options turn the module to on and off 3 times ..leave it on .exit ...go to 129 on you set up and scan

good luck