Wifi Bridge

[ruffnek211]

Has anyone successfully connected a Nanosat wifi bridge to a premium SE receiver with a ps subscription that could offer some help or advice with connection issues?

[torpainter]

The bridge has nothing to do with any paid serve
Did you download the file?

[ruffnek211]

No, I installed it with the CD, I was just providing as much info as possible without being asked to do so.

[torpainter]

Are you able to get an ip?

[Chris_McAloney]

Install Cd from Wi Fi Bridge
Connect WIFI Bridge to computer
Either connect to Network port and usb port
OR
connect to network port and power supply
Open NP11G
Select your bridge(device) on the page
Click Next
Select your wireless network
Enter your password if you have one set
Click Next
It will show Old Settings and New Settings
Click Next
You will get a message saying Configuration has been saved Successfully
Click Exit
Disconnect bridge from computer
Connect to FTA recevier
Plug everything in and turn it all on
Bridge should be working
The lights on the bridge should be going from a blue color to a pinkish color
This means it is working
I will try and do a step by step guide showing how to get the bridge to work if I get some free time and will post it

[edgarphs]

Hi Chris,

I follow all your instructions above and I got the USB wifi device to say save successfully and I could even use the internet from my laptop using the wifi device, however when I plug from my computer and connect to my box it dosent work.

It does show a blue light / pink color but my box says Please wait 3 seconds and it tries to pull the IP adress info, but noting happens.

I dont know what else to do.. Appreciate any help.

[torpainter]

Hi Chris,

I follow all your instructions above and I got the USB wifi device to say save successfully and I could even use the internet from my laptop using the wifi device, however when I plug from my computer and connect to my box it dosent work.

It does show a blue light / pink color but my box says Please wait 3 seconds and it tries to pull the IP adress info, but noting happens.

I dont know what else to do.. Appreciate any help.

try a reboot with back switch?,check for firewalls too