PDA

View Full Version : remote not working



melvin5454
01-15-2013, 12:42 AM
i have fixed the bootloop problem and now my remote want work it turns the power off but it want go to minue what i need to do to fix it

iq180
01-15-2013, 01:26 PM
your reciver is in pal mode and you need ntsc mode, use the rca cables that came with your jynx and an older tv, you can then see the menu to change from pal to ntsc.
your remote is working but you cant see the menu, any time you load the factory file your reciver will defalt to pal mode, now you need to get it to ntsc mode.

melvin5454
01-15-2013, 05:24 PM
ok igot it to show on tv but i cant find the pal/ntsc were to go to change that

Anubis
01-15-2013, 07:21 PM
Change your video setting(aspect ratio) to something that ends in 30 or 60. Example: 1080p_60 or 30
Set it according to what your tv is. If it is a 720p then use 720p_60 or 30

melvin5454
01-15-2013, 08:20 PM
got it up but now it dont scan chanials what do i do to fix this

Anubis
01-15-2013, 08:32 PM
Melvin5454, I am not sure why you are having such a difficult time setting this unit up. It is one of the easiest boxes to set up. Based on your issues you have done zero reading about this unit and how to set it up.
I suggest before you go any further you do some reading. Otherwise you are going to do more harm to the unit and operator error is not covered under warranty.
There are set guides and user feedback galore on how to get the unit up and running.
A good place to start would be here where all the info you need is posted. http://phoenix.satfix.net/forumdisplay.php?1477-Jynxbox-FAQ-and-Guides

melvin5454
01-16-2013, 01:21 AM
i have read and read still no good got everything to work but want scan the chanials it will scan chanials but it skips all tps what you thank about whats rong with that i look around a cant find ant thing on that tp skipping

Nostradamus
01-16-2013, 01:46 AM
it will only scan TPs that it can lock on to. You either have a dish problem, or switch settings wrong or you are trying to scan the wrong sats

melvin5454
01-16-2013, 02:17 AM
it worked good untill it got a bootloop problem got that fix now it want scan the chanials i didnt move the dish and i set the box bock like i had it whayt does user data haveto do with the scan and were to find that data file to put back on the receaver

iq180
01-16-2013, 03:21 AM
it worked good untill it got a bootloop problem got that fix now it want scan the chanials i didnt move the dish and i set the box bock like i had it whayt does user data haveto do with the scan and were to find that data file to put back on the receaver
did you turn the lnb power back on after you loaded the factory file to fix the boot loop problem.
press menu, go down to system and press ok now press ok on system setting and go down to lnb power and right arrow to turn on or off it needs to be on.

melvin5454
01-16-2013, 04:10 AM
a friend messed wjth the user data setting i thank if he did what i need to do to get it back were it was or con i return it back to were it was