Dreamlink HD - the Module it comes with does it get hd channels?

[xroxaz]

The original module the dreamlink hd comes with, is it able to scan hd channels?

[steven charles]

The original module the dreamlink hd comes with, is it able to scan hd channels?well friend you need the sk200 module with your dreamlink hd and make sure it comes with it, and need to point to sats 110-119 and 129 for the hd channels,and don,t forget that you need a code from a private server to connect too and watch tv,but make sure that the private server you get carries the hd channels too....

[dishuser]

well friend you need the sk200 module with your dreamlink hd and make sure it comes with it, and need to point to sats 110-119 and 129 for the hd channels,and don,t forget that you need a code from a private server to connect too and watch tv,but make sure that the private server you get carries the hd channels too....
don't forget about 82 for hd

[xroxaz]

oh i already bought the reciever I have sd channels running fine on it so far, but no hd with the orginal green module thingy. I guess i should buy a sk200 from ebay or something, also would i need a special lnb and dish for hd channels on 129?

[Kingdom]

oh i already bought the reciever I have sd channels running fine on it so far, but no hd with the orginal green module thingy. I guess i should buy a sk200 from ebay or something, also would i need a special lnb and dish for hd channels on 129?

For a FTA receiver you don't need a special lnb for 129. 129 needs same lnb as 119 or 110. But it need bigger dish minimum 30''

[dishuser]

For a FTA receiver you don't need a special lnb for 129. 129 needs same lnb as 119 or 110. But it need bigger dish minimum 30''

can get 129 with an 18" in southern ontario

[bobby]

For a FTA receiver you don't need a special lnb for 129. 129 needs same lnb as 119 or 110. But it need bigger dish minimum 30''
size of dish depends on location and sat your aiming at...might not need a 30" for 129w

[Anubis]

Bottom line is you need the sk200 module in order to decode any HD channels. The factory module will not do it.