sats

[hotrod]

trying to set up a new bell dish useing a y- yoke for 119 and 110 i would like to use a dpp lnb if possible with a sw21 switch, if not
useing a jynxbox ( only 1 recevior) standing in front of the dish what side does the 119 lnb go on to the yoke (right or left ) also what setting do i use with this box ? do i also need a power supply

[Terryl]

Get a DPP twin LNB, that way you don't need the switch.

If you have the LNB's already then the 119 LNB goes on the left side of the yoke looking from the back of the dish.

You don't need a power supply with only 2 LNB's.

And I don't know what settings are used with your receiver.