no signal on 82 with dpp twin / separator dpp [Archive] - satFIX.to

View Full Version : no signal on 82 with dpp twin / separator dpp

felixthecatz

01-29-2013, 02:59 AM

HI

I have no signal on 82w and on 91w everything working . i need your help

thank you

installation

dpp twin
!
!
Separator dpp
! !
! !
Jynxbox hD with 2 jb200

Config
82w

lnb freq : 11250
diseqc 1.0 : port 1
diseqc 1.1 : none
legacy sw : off
legacy LNB : OCS-DP
22k : off
Pol : auto

91w

lnb freq : 11250
diseqc 1.0 : port 2
diseqc 1.1 : none
legacy sw : off
legacy LNB : OCS-DP
22k : off
Pol : auto

Terryl

01-29-2013, 05:00 AM

Get rid of the DPP separator, it wont work with that receiver.

Run a second coax from the second port on the DP twin LNB.

Your settings are fine.

felixthecatz

01-29-2013, 12:26 PM

Thanks Terry

whoknows

01-29-2013, 01:02 PM

Get rid of the DPP separator, it wont work with that receiver.

Run a second coax from the second port on the DP twin LNB.

Your settings are fine.

I'm no expert on dpp l nb, but wouldn't it be easier to just take out the separator and put in a barrel connector, that way he doesn't have to run another coax unless he is running another receiver.