Jynxbox ultra HD v2 and Dish 1000

[Northman]

Has anyone setup the Jynxbox ultra HD v2 w/JB200 with a Dish 1000(3 headed dish)? Was there any problems?

These settings should work?
++++++++++++++++++++++++++++
Sat: 119
Tuner: LNB1(Fixed)
LNB Freq: 11250
Transponder: whatever
DiSEqC1.0: Port1
DiSEqC1.1: Disable
Legacy SW: off
Legacy LNB: OCS-DP
22K: off
Polarity: Auto
++++++++++++++++++++++++++++++

Diseqc # 1 = 119.
Diseqc # 2 = 110.
Diseqc # 3 = 129.

Thanks for any help.

[Northman]

Is there any reason the above settings might not work with v237?

Thanks for any help.

[xxcutive]

your setting are looking correct unless you input the wrong server port and your code are correct. It should say "Connected server is No 1" if not corrected it say "Connect Fail"
Signal should be above 82 % for both

[Northman]

Thanks for your reply xxcutive.

My problem is I'm trying to help a friend remotely(so I can't try settings myself) and so far we cannot get any signal at all so I am just wondering if anyone has had any problems with DPP & Jynx with software at v237. (Sub gets signal fine)

[xxcutive]

Do you own a Jynx box yourself. I just upgrade to 237 and everything works fine . rescan on 110 get 319 channels rescan on 119 get 281 channels and 129 get 267

[bkr™]

Thanks for your reply xxcutive.

My problem is I'm trying to help a friend remotely(so I can't try settings myself) and so far we cannot get any signal at all so I am just wondering if anyone has had any problems with DPP & Jynx with software at v237. (Sub gets signal fine)
Prolly just a settings problem, perhaps your friend can give you his menu settings w/ these birds?

[edrik]

i could have swore that i read the Jynx has power issues with those DN lnbs... the jynx stuf was several pages deep, lol.
i dotn have one so i cant say for sure.

[bkr™]

i could have swore that i read the Jynx has power issues with those DN lnbs... the jynx stuf was several pages deep, lol.
i dotn have one so i cant say for sure.
I have not seen a power issue yet using DP lnbs, so I do not think the problems are hardware related.

[Northman]

Thanks for your reply's everyone I'll get another kick at it tomorrow but it's looking like a user error or bad hardware we shall see.

[xxcutive]

I am using Jynxbox right now with the JB200 and Dish Turbo Hd with DPP 44 SW and works fine .