Jb200

[shadodude]

Anyone know where one might get a guide to follow for installing the jb200 in the ultra v2?

[Nostradamus]

remove cover
plug it in
reinstall cover

not really a very complicated procedure

[shadodude]

Okay, thanks. I will assume there is nothing to unplug or replace?

[Nostradamus]

if you ever changed any type of edge connector card in a desktop computer then installing the module will be no challenge at all

[bkr™]

It is much easier if you remove the rear screw between the rca jacks, and 3 screws holding the circuit board to the chassis as then you can move the circuit board and the module or modules slip right into the 20 pin sockets. Then move all back into place, put on the nuts on the male F jacks and add the removed screws, then you are done.