Duplicate channels on Nano Premium SE

[Sooperman55]

When I do a factory reset and then a rescan on Nano Premium SE, I end up with several duplicate channels,which I then have to go in and delete the doubles that don't work using the Channel Master. I tried factory resetting and hard booting 4 or 5 times before scanning and I still end up with duplicate channels.
An ideas on why this is happening and how to solve the duplicating problem?

[torpainter]

When I do a factory reset and then a rescan on Nano Premium SE, I end up with several duplicate channels,which I then have to go in and delete the doubles that don't work using the Channel Master. I tried factory resetting and hard booting 4 or 5 times before scanning and I still end up with duplicate channels.
An ideas on why this is happening and how to solve the duplicating problem?

usually happens when your settings are incorrect ,are your sats locked?
what kind of scan?
post your set-up and settings for your sats

[Sooperman55]

Thanx for your advise Torpainter, but all my settings are correct. I have worked with allot of different receivers and this is definately specific to the Nano Premium SE or it's software.
Regardless though I solved my own problem by factory defaulting and hard booting after each factory default, about 6 or 7 times. Even after all that I still had about 3 duplicate channels which I then deleted with the CHANNEL MANAGER. I found all the duplicates to be on the 110 sat. I hope this is of some help to all of you.

[torpainter]

Thanx for your advise Torpainter, but all my settings are correct. I have worked with allot of different receivers and this is definately specific to the Nano Premium SE or it's software.
Regardless though I solved my own problem by factory defaulting and hard booting after each factory default, about 6 or 7 times. Even after all that I still had about 3 duplicate channels which I then deleted with the CHANNEL MANAGER. I found all the duplicates to be on the 110 sat. I hope this is of some help to all of you.
never seen anyone posting a similar issue with scanning ,it could be a failing switch also

[melvin5454]

what kind of lnb are you using i to had that problem with a dpp this is what i did i took a peace of alm foul and covered one side of lnb and scand the other side then the same with the other side

[Chris_McAloney]

I would agree with torpainter.That is a failing switch.Maybe buy a better quality switch cause it may be bleeding with the other sats.Seen that many times with cheap switches.