PDA

View Full Version : DN I'm running a legacy quad for 110 and 119 settings



deanosig
02-19-2013, 06:17 AM
What should the LNB settings be for a Legacy quad. Plus the swithces? I've run a DP before, not sure about the legacy.

dishuser
02-19-2013, 12:25 PM
What should the LNB settings be for a Legacy quad. Plus the swithces? I've run a DP before, not sure about the legacy.

legacy uses sw settings

whoknows
02-19-2013, 01:08 PM
No switches. Legacy quad has built in switch. Ln b type is normal or standard. Disq #1 for 119 and #2 for 110.

dishuser
02-19-2013, 01:11 PM
No switches. Legacy quad has built in switch. Ln b type is normal or standard. Disq #1 for 119 and #2 for 110.
diseqc on a legacy?
since when?

whoknows
02-19-2013, 01:35 PM
Since when??? I don't get what you are asking. There are legacy quad or dp quad. The only difference is the ln b type. Dp uses ics-dp and legacy uses standard.
Good for 4 receivers and 2 satellites.
Settings will be as follows
LNB FREQ= 11250
LNB TYPE= NORMAL
22KHZ= OFF
DISQ#1 FOR 119 AND #2 FOR 110
LEGACY SW= OFF
MOTORIZED SYSTEM= NONE


https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTU60Xk23MddzXWaaR7xaHkpVQkBvpjO zZxRZiCvSHv--8V2DGEdA

dishuser
02-19-2013, 02:56 PM
Since when??? I don't get what you are asking. There are legacy quad or dp quad. The only difference is the ln b type. Dp uses ics-dp and legacy uses standard.
Good for 4 receivers and 2 satellites.
Settings will be as follows
LNB FREQ= 11250
LNB TYPE= NORMAL
22KHZ= OFF
DISQ#1 FOR 119 AND #2 FOR 110
LEGACY SW= OFF
MOTORIZED SYSTEM= NONE


https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcTU60Xk23MddzXWaaR7xaHkpVQkBvpjO zZxRZiCvSHv--8V2DGEdA
u
legacy uses sw not diseqc...I know cause I have both the twin and quad..one is sw42 and other is sw44

deanosig
02-20-2013, 05:04 AM
So dishuser what would the setting be or the different setting be on what was posted? I am running a legacy quad (built in switch) with both 110 and 119.

LNB FREQ= 11250
LNB TYPE= NORMAL
22KHZ= OFF
DISQ#1 FOR 119 AND #2 FOR 110
LEGACY SW= OFF
MOTORIZED SYSTEM= NONE

dishuser
02-20-2013, 05:10 AM
So dishuser what would the setting be or the different setting be on what was posted? I am running a legacy quad (built in switch) with both 110 and 119.

LNB FREQ= 11250
LNB TYPE= NORMAL
22KHZ= OFF
DISQ#1 FOR 119 AND #2 FOR 110
LEGACY SW= OFF
MOTORIZED SYSTEM= NONE
diseqc is none

sw settings for a legacy
read the ones I posted above

if I'm wrong whoknows can guide you..lol

deanosig
02-20-2013, 06:11 AM
There is a SW44 Dish 1 or it has Dish 2. Just use Dish 1?

dishuser
02-20-2013, 12:31 PM
There is a SW44 Dish 1 or it has Dish 2. Just use Dish 1?

dish 1 for 119 and dish 2 for 110