PDA

View Full Version : no server connection



davescarbs
02-23-2013, 08:44 PM
i iis runnin a nano priemum nfsp code 16110 and 17110 codes are good i connect with network but no can connect with server .

Glatt
02-23-2013, 08:51 PM
try 37.46.112.230

davescarbs
02-24-2013, 12:28 AM
tryed it still no connect

willard
02-25-2013, 12:11 AM
e mail your server.

Glatt
02-25-2013, 02:38 AM
Do you have an IP connection! Ex 192.168.2.104

dishuser
02-25-2013, 02:42 AM
Do you have an IP connection! Ex 192.168.2.104

read 1st post

Glatt
02-25-2013, 03:24 AM
Read post 1 what server is he connected to?

dishuser
02-25-2013, 03:26 AM
Read post 1 what server is he connected to?

is that what you asked?
no it wasn't

ticktack
02-25-2013, 04:38 AM
that box doesn't work good with two codes, try one.reboot modem,router,and stb.see if it connects sitting on 200

davescarbs
02-25-2013, 01:11 PM
tryed that too i even took it to me buddys place hooked it up and it works fine there bring it back and no connect with server so i onely could figure iys my internet provider or my modem giving me problems

that box doesn't work good with two codes, try one.reboot modem,router,and stb.see if it connects sitting on 200

Chris_McAloney
02-25-2013, 11:32 PM
Make sure you are getting an IP address from your modem/router on the receiver.If not could be the network cable.

hutch
02-26-2013, 12:40 AM
it could be it is remembering your buddy's IP address ... go into the menu/installations/network ... does it say connected at the bottom or wait 3 seconds??? if it says wait 3 seconds & doesn't change then go to IP set up...write down then erase the IP... set to auto at top & hit apply at the bottom...

dishuser
02-26-2013, 12:52 AM
i connect with network but no can connect with server

Glatt
02-26-2013, 04:26 PM
Good for you!

davescarbs
02-27-2013, 01:38 AM
swaped out the modem and connectin with server back up and runnin