DleamLink HD on 118W shows 40% S & Q, No Picture, but on 119 watching TV

[tester2]

hi guys i need your help, i got dreamlink hd box, i loaded this file "DL_HDpvr_118 ", and i got 118-119 one LNB both signal.

and I select in Transmission is set to Turbo 8PSK or DVBS OPSK, still i am unable to get picture on TV on 118W, shows S & Q only upto 40%.

but i am getting on 119W good S & Q 90%, and i am watching TV on 119 perfectly.

so i like to know "how to improve 118W good Signal upto 90% S & Q, to watch TV".


hopefully waiting for your reply.

thanks

[clarkie]

Your not going to pick up 118 and 119 on one LNB need 2 bud...what type of LNB are you used the more info the better chance you will get some help

[tester2]

hi there, i watch tv with one lnb on db500s 118 & 119 work perfectly.

when i change receiver then i notice less signal on 118, but 119 working fine.

here is the lnb info below
GT-SCIR40,
N.F : 0.2dB
SINGLE CIRCULAR LNBF

this lnb work fine still on db500s, no problem at all.

thanks

[tester2]

any way guys finally i get picture on 118w on some channels, so i think i have to realign the Dish for more better signal...thanks

Now i have another Problem, i want to RENAME group like MOVIE to USA MOVIES, so i like to know, how to rename group...thanks

[tester2]

thanks a lot i got it

[Terryl]

hi there, i watch tv with one lnb on db500s 118 & 119 work perfectly.

when i change receiver then i notice less signal on 118, but 119 working fine.

here is the lnb info below
GT-SCIR40,
N.F : 0.2dB
SINGLE CIRCULAR LNBF

this lnb work fine still on db500s, no problem at all.

thanks


The LO for that LNB is 10750, don't use 11250, that will only get you the 119 transponders and a few of the 118 transponders.

However the factory spec's for the dish size needed for good reception on 118 is 33" to 39", if your dish is too small you wont get a good signal on 118, the other reciver may have a bit more gain in the front end then the Dreamlink with an HD receiver card installed.