wont connect

[62bug]

Ok so I have reset modem the router and the limesat then did 3 factory defaults then rechecked my server info with provider and all is good with them then I removed all but one server and tried again.
I get net status connect with IP addy ect but no connect to server.
I have 3 servers and have tried this with each one not having any other server in still no connect altho I show connected to net with IP I cant think of any other thing.
Have rebooted many times and have been at this for 3 days now. alas I come to you for sugestions
Please note I have set up more than a few stb,s but this has me scratching my head.

[Anubis]

Check your P$ section. Maybe the port has changed.

[whoknows]

Sometimes turning japan public server off will do the trick.

[62bug]

who knows and anibus thanks but nope japan is off and port is cool

[Anubis]

Make sure your P$ setting it set to on, put on channel 200 then turn the box off, then your router then your modem and let sit for 5 mins then turn on modem and let set up turn router on and let set up then then your box. Wait for a couple mins.

[62bug]

thanks anubis I will try that tomorow as I am using my landloards wifi and they are out for the evening.
if that dont work I am gonna take it to a friends and try it on his internet

[whoknows]

Just for the halibut go to network settings and then ip-box info and change DNS1 to 8.8.8.8 and DNS2 to 8.8.4.4 and then exit and leave it on a couple different channels for a bit. If that doesn't do it go back to ip-box info and hit the yellow button and say yes and that will return your settings to original. good luck

[lobsterpot]

just had the same problem with an ultra. it would connect at one location and wounldn't connect at another location. had to change out the router. have other boxes running at the same location ,but only limesat would not work. use d-link router.