PDA

View Full Version : Help with turbo hd dish


chadjohnson38
03-01-2013, 02:10 AM
Does anyone know if the next fta will work directly with a turbo hd type dish????? If so what are the setup procedures as far as the switch placement???
ticktack
03-01-2013, 02:45 AM
power inserter needed to power lnbs and it goes on port #1 seperate line.,receiver on port #2 the switch is built in. good for sats 119,110,129.next will work, but you will only get sd chnnls,unless you buy HD receiver.
chadjohnson38
03-02-2013, 09:58 PM
Are all dish power inserters the same?? I see alot of differant ones on ebay....
Aldo52
03-03-2013, 01:57 AM
Which Power Inverter switch would you recommend...DP34 or DPP44...Which HD FTA DO YOU Recommend...I Appreciate IT,...
ticktack
03-03-2013, 05:07 AM
if it's three round eye lnbs you don't need the dpp44 switch,but if it has the enclosed eye lnbs you will. and the inverter is needed for the three single eyes that stick way out round white eyes at the end,and four coaxil hookups #1,#2,#3,and #4 with inverter on port #1,and receiver on port#2 and second receiver on port#3 it has internal switch for different sats. dreamlink HD.just make sure the inverter works with dish turbo HD.