rljones
03-03-2013, 03:10 PM
I have an Ilink 9600 for about 2 weeks & a problem. When i was setting up both sats[119-110] according to the set up guide here
it states the sat name has to be to the right of the screen in antenna setup after you have added the Sat. I added 119 first
Sat: echo7
lnb Freq:11250
diseqc: lnb1
22kh tone:off
lnb power: auto
lnb power: 13/18 v
T.P. Freq:12224/v2000
Ant. motor :off
The sat name does not show on 119 & the S/Q bars especially Quality is about 20%
They are Blue instead of Green.
Now when i move the T.P. Freq a couple of clics to the right[12253/v2000] the quality becomes 99%
& the sat name is listed. This is affecting the Quality on those Channels that are on the 119 sat
. Quality is about 70%
The 110 Sat is perfect, the only difference between the Sat setup is the LNb diseqc[port2]
What might be my Problem & TIA
P.S. THe setting will not stay, once you close out the Sat setup it reverts back to the settings above.
it states the sat name has to be to the right of the screen in antenna setup after you have added the Sat. I added 119 first
Sat: echo7
lnb Freq:11250
diseqc: lnb1
22kh tone:off
lnb power: auto
lnb power: 13/18 v
T.P. Freq:12224/v2000
Ant. motor :off
The sat name does not show on 119 & the S/Q bars especially Quality is about 20%
They are Blue instead of Green.
Now when i move the T.P. Freq a couple of clics to the right[12253/v2000] the quality becomes 99%
& the sat name is listed. This is affecting the Quality on those Channels that are on the 119 sat
. Quality is about 70%
The 110 Sat is perfect, the only difference between the Sat setup is the LNb diseqc[port2]
What might be my Problem & TIA
P.S. THe setting will not stay, once you close out the Sat setup it reverts back to the settings above.