Noticed 119 file released

[whositwhatnow]

Haven't tried it, but the changelog doesn't look promising..

This file is MANDATORY load
Make sure to do Factory Default at System Restore menu after loading.
- Timing issue adjustment

Don't know if i can post it, i'll let mods take:tape: care of that.

[kcorscadden]

Just an FYI

If it is a mandatory update, then anyone who has 116 or lower needs to first update the factory file to version 6.0 before loading this
file.

[JCO]

Haven't tried it, but the changelog doesn't look promising..

This file is MANDATORY load
Make sure to do Factory Default at System Restore menu after loading.
- Timing issue adjustment

Don't know if i can post it, i'll let mods take:tape: care of that.

all members are allowed to post files.. Make sure its a legit and working file before you post it though..

[whositwhatnow]

all members are allowed to post files.. Make sure its a legit and working file before you post it though..

i'm at work, so i dont have chance to do it, by the time i get home someone will :)

[JCO]

i'm at work, so i dont have chance to do it, by the time i get home someone will :)

If it's not posted when you finish work, we are counting on you to do so...LOL

[whositwhatnow]

If it's not posted when you finish work, we are counting on you to do so...LOL

alrighty :)

[kijiji]

I just posted it up here.

[108Mobbin]

So it is to be used with the new factory 106 correct

[sg2100]

Gonna go and and loadem both and will post any results if any . Perhaps Timing issue is the result of daylight savings this weekend.

[JCO]

Gonna go and and loadem both and will post any results if any . Perhaps Timing issue is the result of daylight savings this weekend.

Timming issue is related to the PS operation.

[crazy carl]

Sg2100 let us now how you make out my neighbour's are still leary on 1.06 with any of the new files

[dishuser]

Sg2100 let us now how you make out my neighbour's are still leary on 1.06 with any of the new files

boxes have been coming with 1.06 for 4 or 5 months

[crazy carl]

boxes have been coming with 1.06 for 4 or 5 months

i beleive it, kickin it back in the 105 116 though, as people who have told me about them testing anything newer has been not to good

[whositwhatnow]

Well I loaded this, and whatever they did, impressed. Picked up p$ connections almost instantly. Channel changes quicker, tested using 3 p$ no lag whatsoever. Still going to keep eye out, see if anything else catches my eye

[whositwhatnow]

Found a glitch, I went to scan in my 110, and it doesn't lock onto it. I have strong signal, it's like the lnb not working. Downgrade back to 117 no issues scanning in

[sg2100]

Well I loaded this, and whatever they did, impressed. Picked up p$ connections almost instantly. Channel changes quicker, tested using 3 p$ no lag whatsoever. Still going to keep eye out, see if anything else catches my eye

I managed to scan in all three with my invacom lnb and 39" er . channels coming in faster and running smooth on my end with 106 /119 . loaded . Just remember to FD and give it a rear kill switch between each load . I usually scan in a sat and once loaded I soft boot off , rear switch it and move on to the next sat . always works good for me . Goodluck

[Mensam]

Loaded the new factory 106 did a hard reboot, loaded 119, did a hard reboot and everything is working good so far. I find the channel changing a lot faster.

[skyview]

friend was having rebooting and freezing on other files,this one is rock solid so far,she hasnt seen a freeze all day or a reboot

[rayr]

I was on factory 106 and 117. Loaded 119 and just rebooted without doing a factory default. Like others have stated the channel changes are quicker and all $PS are connecting ok and are freeze free. For now the software seems stable and no problems have been found. Will verify for 24-48 hrs and report back.

[daryld]

Found a glitch, I went to scan in my 110, and it doesn't lock onto it. I have strong signal, it's like the lnb not working. Downgrade back to 117 no issues scanning in

I had this hapen as well. I simply changed the LNB type, then changed back to OCS-DP and signal came back. It didn't happen on any other sat and things seem to be working well sofar.

[zhong]

If everything is working, why change to this version ?

[dishuser]

If everything is working, why change to this version ?

no one said you have to

[whositwhatnow]

I had this hapen as well. I simply changed the LNB type, then changed back to OCS-DP and signal came back. It didn't happen on any other sat and things seem to be working well sofar.

That didn't work for me. I was able to scan them in using the positioner settings Page.

[f2air045]

No epg on most ch

[rayr]

No epg on most ch

I was able to get epg on most DN channels by using the method on http://www.satfix.net/showthread.php?119072-Populate-your-Dreamlink-s-EPG. However the epg for bev does not work.

[KIDWCKED]

Press epg..Then bev(blue)Will default to the necessary ch...And update..

[Mensam]

So far so good with this file! I have had about one second of freezing, my P$ are working together very nicely. As I said before my channel changing is faster and the best thing is I now have a 3 day guide. For sure there are good improvements, good work Dreamlink!

[rayr]

Press epg..Then bev(blue)Will default to the necessary ch...And update..

Yes that is what I do but it does not work. If yours works can you please tell me what switch you are using as it may have to do with the fact I am using a diseq 1.1 settings for a 4X8 switch.

[aceallenk]

Flashed 119 + factory 2 days ago and have not experienced 1 freeze on south since. My north was always solid as a rock, so I wouldn't have thought the bin was the issue. Must say 119 is a welcome improvement and have no issues at all with scan, epg, or freezeing (north + south). Like this fix so much I ordered my second DLHD receiver to replace an old Nano.

[german sheppard]

Running 119 with no issues at all past few days...just put 119 in with no fac file and hit restore and rescanned all birds. Good to go....

[theshark]

i too went back to 117 new file 119 will not bring in 91sat where 117 does....

[dishuser]

i too went back to 117 new file 119 will not bring in 91sat where 117 does....

119 has no issues with 82 to 129

[imseakin]

since I upgraded to 106 and then 119, I cant see 82 to 129. What happened?

Please let me know what I should do to get these satellites back in the list.

thanks

[yappapi]

since I upgraded to 106 and then 119, I cant see 82 to 129. What happened?

Please let me know what I should do to get these satellites back in the list.

thanks

read the post above yours.
how about a hard boot after loading??

[erijerdes]

Do a factory default twice after update, it should bring your sat's back.

[smallgirl]

Guys - does this file resolve freezing issues compared to 118 or 117 file?

[JCO]

Guys - does this file resolve freezing issues compared to 118 or 117 file?

Yes it does.. Laod the latest factoy file, do a factory default.. Load 119 do a factory default and apperently the freezing is history.
Its not a bad idea to save the server and channel list to the usb beforehand.. It saves reinputing and scanning..

[smallgirl]

Thanks bud

[phantom2013]

Wouldn't the freezing be related to the P$ issues?

I went to 119 and my neighbor is still on 117.
My neighbor 2 is on 119 as well.

I was checking my signal and realized the Signal quality is lower. Hovering close to 60s rather than up closer to 90s.
Only 129 was up close to 90s+.
I thought my dish moved because of the snow. I even went up there to fiddle with it with a scanner. It hasn't moved.
What makes it more confusing for me is that my 129 is totally a different dish then 91,110,119.
So that is why i thought my dish moved.

I checked my Limesat receiver and notice that the signals on all dish is high 90s.
Now i am convinced it is the BIN 119.
I was going to revert back to 117 but JCO's post about freezing is with the BIN makes me not want to revert back.

Just to prove the low signal is with 119 i have a second Dreamlink HD i will revert back.
I also notice other people posting about can't scan in some sat after the upgrade to 119.
What i think is occuring is that they had their sat strength fall below the signal lock is.
I am wondering if they originally have signals close to 70-80 and now it dips in the 50s after 119, they can't scan.

i report back after the test. hopefully this helps others because i was going to relocate the dish altogether today.

[BIGbLUEbOLAS]

Wouldn't the freezing be related to the P$ issues?

I went to 119 and my neighbor is still on 117.
My neighbor 2 is on 119 as well.

I was checking my signal and realized the Signal quality is lower. Hovering close to 60s rather than up closer to 90s.
Only 129 was up close to 90s+.
I thought my dish moved because of the snow. I even went up there to fiddle with it with a scanner. It hasn't moved.
What makes it more confusing for me is that my 129 is totally a different dish then 91,110,119.
So that is why i thought my dish moved.

I checked my Limesat receiver and notice that the signals on all dish is high 90s.
Now i am convinced it is the BIN 119.
I was going to revert back to 117 but JCO's post about freezing is with the BIN makes me not want to revert back.

Just to prove the low signal is with 119 i have a second Dreamlink HD i will revert back.
I also notice other people posting about can't scan in some sat after the upgrade to 119.
What i think is occuring is that they had their sat strength fall below the signal lock is.
I am wondering if they originally have signals close to 70-80 and now it dips in the 50s after 119, they can't scan.

i report back after the test. hopefully this helps others because i was going to relocate the dish altogether today.

Did you get to test out? Thanks