please help . scramble

[tonym01]

Every thing was good now scramble internet connected ok rebooted box modem and router sig 98 Q 98 cannel 101 is working. When it was working info showed server 2 now shows nothing when i hit the info red button it just an empty black box thank you

[bad1]

What reciever are we helping you with

[tonym01]

nano premium 17 days left on donation

[tonym01]

i put the information ip port number and that info on server 1 and 2 it used to work on 2 now no number comes up.

[ticktack]

read new announcement thread

[tonym01]

i did im new to this and dont get it

[KIDWCKED]

i did im new to this and dont get it

You can check your code here...Code Checker (http://www.satfix.net/showthread.php?119655-Code-Checker)

[bad1]

i put the information ip port number and that info on server 1 and 2 it used to work on 2 now no number comes up.
Unless you have two donations you can't use the same one on both ports

[tonym01]

it says i have 17 days

[hutch]

some IP/domains have changed read the announcement thread

[ICEMAN]

If your donation still good,,then please post your settings so we can help you with your problem.thank you

[tonym01]

type drean

server no 1

softcam newcam

imput type ip adress

server 79.142.67.70

port 35010

au on

authorization

id xxxxxxxxxxxxxx
password xxxxxxxxxxxxxx
des key 6103403445406970987123412134

my box is NANO PREMINUM internet cable direct to box signal and quality 98% channel 101 working Thanks for your help

[got2bme]

try IP 79.142.67.73

[tonym01]

with that ip at least it shows connection 1 but still scrambled

[ticktack]

use the i p they assigned you. make sure server 2 is cleared out. shut off back of box,unplug for ten minutes. plug in, turn on back of box,then set on channel 200.

[tonym01]

thank you i will try that

[tonym01]

i try to do that still no go

[ticktack]

when you go to network,does it say connected at bottom of screen? if not go to ip setup hit auto at top with ok button wait till fills in then hit apply then ok.exit all the way out set on 200 see if works then.

[tonym01]

it does say connected. by the way thanks for the help so far

[tonym01]

when i go from ip to domain server says please fix me T.T when i try to change it then exit it does not change.

[Styx_N_Stones]

type drean

server no 1

softcam newcam

imput type ip adress

server 79.142.67.70

port 35010

au on

authorization

id xxxxxxxxxxxxxx
password xxxxxxxxxxxxxx
des key 6103403445406970987123412134

my box is NANO PREMINUM internet cable direct to box signal and quality 98% channel 101 working Thanks for your help

For your assigned port the latest info (dated yesterday) is either:

SERVER IP: 79.142.67.70

or

SERVER NAME: 6.ikspstv.com

Depending on your STB there mite or mite not be an advantage to using both address (IE #1 and #2). This is where 'Testing' comes into play. Ive been having frequent freezing today with both... and IKS66. But it is working on this end (nFusion Solaris w/NOI).

Ive never used a nano... but I seem to recall that one of the STBs had a recent update/patch the fixed freezing. I dont know if this applies to your unit. Was it working fine in the last week or so?

Hope this helps... cross your fingers...

[tonym01]

THANK ALL U GUYS for the help i finally got it going . I reset data on all servers and started all over and it came up beauty.